How to Edge Band Curves with Edge Banding359

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, MDF, or other panel materials to give them a finished look and protect them from moisture and wear. Edge banding is typically made of wood, PVC, or melamine.

When edge banding a straight edge, the process is relatively straightforward. However, edge banding a curved edge can be more challenging. Here are some tips on how to edge band curves:

1. Use a flexible edge banding material

The first step is to choose a flexible edge banding material. This will allow you to bend the material around the curve without it cracking or breaking.

There are a number of different flexible edge banding materials available, including:
PVC edge banding
Melamine edge banding
Wood veneer edge banding
Pre-glued edge banding

Pre-glued edge banding is the easiest to use, as it comes with a pre-applied layer of adhesive. However, it is also the most expensive option.

2. Cut the edge banding to size

Once you have chosen your edge banding material, you need to cut it to size. To do this, measure the length of the curve that you need to edge band, and then add 1 inch to the measurement. This will give you enough material to overlap the ends of the edge banding.

3. Apply adhesive to the edge of the panel

The next step is to apply adhesive to the edge of the panel that you are going to edge band. You can use a brush or a roller to apply the adhesive.

Be sure to apply the adhesive evenly, and make sure that you get it all the way to the edge of the panel.

4. Apply the edge banding

Once you have applied the adhesive, you can start to apply the edge banding. To do this, simply peel off the backing of the edge banding and press it onto the edge of the panel.

Start at one end of the curve and work your way towards the other end. As you apply the edge banding, be sure to press it down firmly so that it adheres to the panel.

5. Trim the excess edge banding

Once you have applied the edge banding, you need to trim the excess material. To do this, use a sharp knife or a utility knife to cut the edge banding flush with the edge of the panel.

6. Sand the edge banding

The final step is to sand the edge banding. This will help to smooth the edges and give it a finished look.

To sand the edge banding, use a fine-grit sandpaper and sand it in the direction of the grain.

Tips for edge banding curves
If you are having trouble getting the edge banding to stick to the panel, you can try using a heat gun to soften the adhesive.
If the edge banding is too thick or too thin, you can try using a different thickness of material.
If you are edge banding a large curve, you may need to use a helper to hold the panel in place while you apply the edge banding.
Once you have applied the edge banding, be sure to let it dry completely before using the panel.

2024-10-16

Previous：How to Edge Band Furniture with China Furniture Edge Banding

Next：How to Apply Pre-Glued Edge Banding