How to Edge Band with Manual ABS Edging Strips149

ABS edging strips are a type of thermoplastic material that is widely used in the furniture industry for edge banding. They are durable, water-resistant, and come in a variety of colors and finishes to match any décor. Manual ABS edging strips can be applied using a variety of tools and techniques, but the most common method is to use a hand-held edge bander.

To edge band with manual ABS edging strips, you will need the following tools and materials:* ABS edging strips
* Hand-held edge bander
* Trimmer
* Sandpaper
* Tack cloth
* Adhesive

Once you have gathered your tools and materials, you can begin the edge banding process. Here are the steps on how to edge band with manual ABS edging strips:1.

Prepare the edge of the substrate. The edge of the substrate should be clean, dry, and free of any dust or debris. If the edge is not properly prepared, the adhesive will not adhere properly and the edge banding will not be secure.2.

Apply adhesive to the edge of the substrate. The type of adhesive you use will depend on the type of ABS edging strip you are using. Always follow the manufacturer's instructions for applying the adhesive.3.

Apply the ABS edging strip to the edge of the substrate. Align the edge of the ABS edging strip with the edge of the substrate and press it into place. Use a hand-held edge bander to apply even pressure along the entire length of the edge banding.4.

Trim the excess ABS edging strip. Once the ABS edging strip is in place, use a trimmer to trim the excess material. Be sure to trim the excess material flush with the edge of the substrate.5.

Sand the edge of the ABS edging strip. Use sandpaper to smooth the edge of the ABS edging strip. This will help to create a finished look and prevent the edge from snagging on clothing or other objects.6.

Clean the edge of the ABS edging strip. Use a tack cloth to clean the edge of the ABS edging strip. This will remove any dust or debris that may have accumulated during the edge banding process.

Your ABS edge banding is now complete!

Here are some additional tips for edge banding with manual ABS edging strips:* Use a sharp trimmer to cut the excess ABS edging strip. A dull trimmer will tear the material and leave a rough edge.
* Sand the edge of the ABS edging strip lightly. Too much sanding can damage the material.
* Clean the edge of the ABS edging strip thoroughly. Any dust or debris will prevent the adhesive from adhering properly.
* If you are using a water-based adhesive, be sure to allow the adhesive to dry completely before using the furniture.
With a little practice, you can edge band with manual ABS edging strips like a professional. This is a great way to add a finished look to your furniture and protect it from wear and tear.

2024-10-17

Previous：What is Edge Banding Used for in Edge Banding Machines?

Next：How to Cut Edge Banding for Cabinet and Ceiling Moulding