How to Edge Band Curved Moldings [Video]267

Edge banding is an essential process for protecting and enhancing the appearance of furniture and other woodworking projects. It involves applying a strip of material, typically made of PVC, wood, or metal, to the exposed edges of wood panels. Edge banding can create a finished look, prevent moisture damage, and improve durability.

When it comes to curved moldings, edge banding can be a bit more challenging than with straight edges. However, with the right techniques and tools, it is possible to achieve professional-looking results. In this step-by-step video guide, I will show you how to edge band curved moldings using a variety of methods.

Materials and Tools

Before you begin, you will need to gather the following materials and tools:* Curved molding
* Edge banding material
* Edge banding adhesive
* Trim router
* Flush trim bit
* Sandpaper or sanding block
* Tack cloth
* Optional: Edge banding roller

Step 1: Prepare the Curved Molding

Start by cleaning the surface of the curved molding with a tack cloth to remove any dust or debris. Ensure the molding is free of any bumps or rough spots that may affect the adhesion of the edge banding.

Step 2: Cut the Edge Banding

Measure and cut the edge banding to the desired length. For curved moldings, it is important to cut the edge banding at a slight angle to match the curve of the molding. This will help prevent gaps or overlaps when applying the edge banding.

Step 3: Apply the Edge Banding Adhesive

Apply a thin layer of edge banding adhesive to the back of the edge banding. Ensure the adhesive is evenly distributed and avoid applying too much, as this can lead to excess adhesive oozing out from the sides.

Step 4: Position the Edge Banding

Align the edge banding with the edge of the curved molding and press it into place firmly. Use your fingers or an edge banding roller to apply pressure evenly along the entire length of the edge banding.

Step 5: Trim the Excess Edge Banding

Once the edge banding is in place, use a flush trim bit in a trim router to trim off any excess edge banding that overhangs the edges of the curved molding. Hold the router firmly and guide it along the edge of the molding, taking care not to gouge or damage the wood.

Step 6: Sand and Finish

Sand the edge banding and the surrounding area to smooth out any rough edges or imperfections. Use fine-grit sandpaper or a sanding block and work in the direction of the grain. Finally, wipe down the surface with a tack cloth to remove any dust.

Tips for Edge Banding Curved Moldings

Here are a few tips to help you achieve the best results when edge banding curved moldings:* Use a sharp trim router bit to ensure clean and precise cuts.
* Apply the adhesive evenly to both the edge banding and the molding for better adhesion.
* Avoid using too much adhesive, as this can lead to excess adhesive oozing out and creating a messy appearance.
* Practice on scrap wood before attempting to edge band actual pieces to get the hang of the technique.
* Work in a well-ventilated area when using adhesives.

2024-10-18

Previous：How to Apply Edge Banding to Hardwood

Next：How to Get a Perfect Edge Banding for Woodworking Joints