How to Replace Edging Strips on Mistakenly Edged Panels143

Mistakenly edging panels can be frustrating, especially when you're dealing with high-quality furniture. The good news is that it's possible to replace the edging strips and salvage the pieces. Here's a step-by-step guide to help you out:

Materials You'll Need:* New edging strips
* Edging cutter
* Hot melt glue gun
* Clean rags
* Utility knife
* Sandpaper
* Tack cloth

Step 1: Remove the Old Edging Strips* Use the edging cutter to carefully score the old edging strips along the edge of the panel.
* Gently pry the strips off using a utility knife or flathead screwdriver.
* Clean the surface of the panel to remove any remaining adhesive.

Step 2: Prepare the New Edging Strips* Cut the new edging strips to the appropriate length.
* Apply a thin layer of hot melt glue to the back of the strips.

Step 3: Apply the New Edging Strips* Carefully align the new edging strips with the edge of the panel.
* Press the strips firmly into place, ensuring that the glue makes contact with the panel surface.
* Use a clean rag to smooth out any excess glue and remove air bubbles.

Step 4: Trim and Sand the Edging Strips* Once the glue has dried, trim any excess edging material using a utility knife or sandpaper.
* Sand the edges of the edging strips to smooth them out and remove any sharp edges.
* Wipe the panel with a tack cloth to remove any dust or debris.

Step 5: Finish the Project* Apply a thin coat of clear finish to the edging strips to protect them and enhance their appearance.
* Allow the finish to dry completely before using the furniture.

Tips:* Use a high-quality edging cutter to ensure a clean, precise cut.
* Apply the hot melt glue evenly to prevent gaps or voids.
* Work quickly when applying the edging strips to prevent the glue from cooling down.
* If you make a mistake, remove the edging strip immediately and reapply it with fresh glue.
* Always test the edging cutter on a scrap piece of material before using it on the actual furniture.
By following these steps, you can successfully replace edging strips on mistakenly edged panels and restore your furniture to its original condition.

2024-10-18

Previous：How Round-Over Edging Banding Knives Help You Achieve a Flawless Finish

Next：How to Remove Edge Banding and Trim Strips