How to Differentiate Old and New Edge Banding on Furniture96

Edge banding is a thin strip of material that is applied to the exposed edges of furniture panels. It serves both functional and aesthetic purposes. Functionally, edge banding protects the core material from moisture and damage. Aesthetically, it enhances the appearance of the furniture by providing a finished look and hiding the raw edges of the panels.

There are two main types of edge banding: pre-glued and self-adhesive. Pre-glued edge banding comes with a layer of adhesive that is activated by heat. Self-adhesive edge banding has a peel-and-stick backing that allows for easy application. Both types of edge banding can be made from a variety of materials, including wood, plastic, metal, and paper.

Over time, edge banding can become damaged or worn. This can be due to exposure to moisture, heat, or simply wear and tear. When this happens, it is necessary to replace the old edge banding with new edge banding. However, it can be difficult to distinguish between old and new edge banding, especially if the new edge banding is a similar color and material.

There are a few key ways to tell the difference between old and new edge banding. First, look at the edges of the panels. If the edge banding is starting to peel or crack, it is likely old and needs to be replaced. Second, feel the edge banding. If it is soft or pliable, it is likely new. Old edge banding will be hard and brittle. Finally, look at the color of the edge banding. If the color is faded or discolored, it is likely old and needs to be replaced.

If you are unsure whether or not the edge banding on your furniture needs to be replaced, it is always best to consult with a professional. A professional will be able to assess the condition of the edge banding and recommend the best course of action.

Additional Tips for Replacing Edge Banding* Use a sharp utility knife to cut the old edge banding away from the panel.
* Be careful not to damage the panel when removing the old edge banding.
* Apply a thin layer of adhesive to the edge of the panel before applying the new edge banding.
* Use a roller or press to apply pressure to the new edge banding and ensure a good bond.
* Trim any excess edge banding with a sharp utility knife.
* Sand the edges of the new edge banding to smooth any rough edges.

2024-10-19

Previous：Soft Forming Edge Banding - What Width Edge Banding Do I Use?

Next：Edgebanding Problems: What to Do When Cabinet Edgebanding Falls Off