How to Manually Edgeband with Edgebanding Tape255

Edgebanding tape is a thin strip of material that is applied to the exposed edges of plywood, MDF, or other wood products to create a finished look and protect the edges from damage. Edgebanding can be applied by hand or with a machine, but hand-applied edgebanding tape is a relatively simple and inexpensive way to achieve professional-looking results.

Materials You'll Need
Edgebanding tape
Iron or edgebander
Trimmer or utility knife
Sandpaper or sanding block

Steps1. Prepare the edge of the wood
The edge of the wood should be clean and free of any dirt or debris. If the edge is rough, you may want to sand it lightly to smooth it out.
2. Apply the edgebanding tape
Cut a piece of edgebanding tape to the length of the edge you want to cover. Peel off the backing paper and apply the tape to the edge of the wood. Use your iron or edgebander to heat the tape and adhere it to the wood.
3. Trim the excess tape
Once the tape is applied, use a trimmer or utility knife to trim off any excess tape. Be careful not to cut into the wood.
4. Sand the edge
Once the excess tape is trimmed off, sand the edge lightly to smooth it out. You can use a sandpaper block or a sanding sponge.

TipsHere are a few tips for applying edgebanding tape:

Use an iron with a low to medium heat setting. Too much heat can damage the tape.
Apply the tape in short sections. This will help to prevent the tape from bubbling or wrinkling.
Use a roller to smooth out the tape after you apply it. This will help to ensure that the tape adheres properly.
If you are using an edgebander, make sure that the machine is properly calibrated. An improperly calibrated edgebander can damage the tape or the wood.

ConclusionApplying edgebanding tape is a relatively simple and inexpensive way to achieve professional-looking results. By following these steps, you can easily apply edgebanding tape to your wood projects.

2024-10-21

Previous：How Long Does it Take to Re-Edge Kitchen Cabinet Edging?

Next：How to Edge Band Wood: A Guide to Machine and Manual Techniques