How to Re-edge Veneer Edge Banding77

Veneer edge banding is a versatile and popular method for finishing the edges of furniture, panels, and other woodworking projects. However, over time, the edge banding may become damaged or worn, requiring repair or replacement. One cost-effective and efficient approach to restoring the appearance of your edge banding is to re-edge it.

Materials Required for Re-edging:* Compatible veneer edge banding
* Sharp utility knife
* Contact cement
* Sanding block or sandpaper
* Edge trimming router or hand plane
* Flush trim saw or jigsaw

Step-by-Step Guide:

1. Remove the Existing Edge Banding:

* Using a sharp utility knife, carefully score along the edge of the existing edge banding.
* Pry the edge banding loose with a small chisel or blade.
* If the edge banding is glued on, apply heat with a heat gun to soften the adhesive before removing it.

2. Prepare the Surface:

* Remove any remaining adhesive residue from the surface of the substrate.
* Sand the edge of the substrate to smooth any rough edges and create a clean surface for the new edge banding.

3. Apply Contact Cement:

* Evenly apply a thin layer of contact cement to both the edge of the substrate and the back of the new veneer edge banding.
* Allow the cement to dry to the touch according to the manufacturer's instructions.

4. Attach the New Edge Banding:

* Align the new edge banding with the edge of the substrate.
* Carefully press down on the edge banding to bond it to the surface.
* Use a rubber mallet or roller to ensure a secure bond.

5. Trim the Excess Edge Banding:

* Use an edge trimming router or hand plane to remove the excess edge banding that extends beyond the edge of the substrate.
* Ensure that the edge is flush with the surface.

6. Flush Trim the End Grain:

* Use a flush trim saw or jigsaw to trim the end grain of the edge banding flush with the end of the substrate.
* This will create a clean and finished appearance.

7. Sand and Finish:

* Sand the re-edged edge banding to remove any imperfections or sharp edges.
* Apply your desired finish, such as paint, stain, or clear coat, to match the surrounding surface.

Additional Tips:* Use a veneer edge banding that closely matches the species, color, and grain of the substrate.
* Practice on scrap material before re-edging your actual project.
* If the edge banding is thick, it may be necessary to use a thicker contact cement or to apply multiple layers.
* Allow ample drying time between each step to ensure a strong and durable bond.
* Be patient and take your time to achieve a professional-looking finish.

2024-10-22

---

Previous：How to Apply Floor Base Molding: A Detailed Guide

Next：How to Calculate Edge Banding Thickness for Board Edging