How to Apply Pre-Glued Edge Banding106

Pre-glued edge banding is a convenient and efficient way to finish the edges of your furniture. It is available in a variety of materials, including wood, PVC, and metal, and can be applied using a variety of tools and techniques. In this article, we will discuss how to apply pre-glued edge banding using a hand iron.

Materials and Tools* Pre-glued edge banding
* Hand iron
* Utility knife
* Sandpaper or sanding block
* Trimming tool (optional)

Instructions1. Prepare your edge banding. Cut the edge banding to the desired length. If you are using a wood edge banding, you may need to sand the edges to smooth them out.
2. Apply the edge banding. Place the edge banding on the edge of your furniture, aligning the edge of the banding with the edge of the furniture. Use a hand iron to heat the edge banding and activate the glue. Hold the iron in place for a few seconds, applying even pressure.
3. Remove excess glue. Once the edge banding has been applied, use a utility knife to trim off any excess glue. You can also use a sanding block to smooth out the edges of the banding.
4. Trim the edge banding. If you are using a wood edge banding, you may need to trim the edges to make them flush with the surface of the furniture. You can use a trimming tool or a utility knife to do this.

Tips* Use a sharp utility knife to trim the edge banding. A dull knife will tear the banding and make it difficult to get a clean finish.
* Apply even pressure when using the hand iron. If you apply too much pressure, you may damage the edge banding.
* If you are using a wood edge banding, be sure to sand the edges before applying it. This will help to ensure a smooth finish.
* If you are having difficulty applying the edge banding, you can use a heat gun to help activate the glue.

ConclusionPre-glued edge banding is a great way to finish the edges of your furniture. It is easy to apply and can be used on a variety of materials. By following the instructions in this article, you can achieve a professional-looking finish on your furniture.

2024-10-22

Previous：How to Edge Band on Shorts Rails

Next：How to Edge Band with Edgebanding Trim