How to Trim Narrow Edging Strips for Chinese Furniture215

Edging strips are essential for giving Chinese furniture a finished and polished look. They help to conceal the raw edges of wood panels and create a smooth, seamless surface. However, when working with narrow edging strips, it is important to take special care when trimming them to avoid damaging the material.

Here is a step-by-step guide on how to trim narrow edging strips for Chinese furniture:

1. Gather your tools.You will need the following tools:
- A sharp utility knife or razor blade
- A straight edge or ruler
- A miter box or guiding track tool
- A sanding block or sandpaper

2. Measure and mark the edging strip.Use the straight edge or ruler to measure and mark the length of the edging strip that you need. Make sure to measure twice to ensure accuracy.

3. Cut the edging strip.Use the utility knife or razor blade to cut the edging strip to the desired length. Hold the knife at a 45-degree angle and apply even pressure as you cut. Be careful not to apply too much pressure, as this could cause the strip to tear or splinter.

4. Sand the edges of the edging strip.Use the sanding block or sandpaper to lightly sand the edges of the edging strip. This will help to remove any rough or uneven edges and create a smooth finish.

5. Apply the edging strip to the furniture.Apply the edging strip to the furniture using a suitable adhesive. Make sure to align the strip carefully and press it into place. Use a soft cloth or roller to smooth out any air bubbles or wrinkles.

6. Trim the excess edging strip.Use the utility knife or razor blade to trim any excess edging strip that extends beyond the edge of the furniture. Hold the knife at a 45-degree angle and apply even pressure as you cut. Be careful not to cut too close to the furniture, as this could damage the surface.

7. Sand the trimmed edges.Use the sanding block or sandpaper to lightly sand the trimmed edges of the edging strip. This will help to create a smooth, finished surface.

Tips for trimming narrow edging strips:- Use a sharp utility knife or razor blade. A dull blade will make it more difficult to cut the edging strip cleanly.
- Hold the knife at a 45-degree angle. This will help to create a clean, mitered edge.
- Apply even pressure as you cut. This will help to prevent the edging strip from tearing or splintering.
- Sand the edges of the edging strip. This will help to create a smooth, finished surface.
- Apply the edging strip carefully. Make sure to align the strip carefully and press it into place.
- Trim the excess edging strip. Use a utility knife or razor blade to trim any excess edging strip that extends beyond the edge of the furniture.
- Sand the trimmed edges. Use a sanding block or sandpaper to lightly sand the trimmed edges of the edging strip. This will help to create a smooth, finished surface.

2024-10-22

Previous：Edge Banding Can Seal Up to What Thickness?

Next：Edgebanding vs. Trim: What‘s the Difference?