How to Apply Edge Banding to a Rounded Hole53

Edge banding is a thin strip of material used to cover the exposed edges of particle board, plywood, and other wood products. It helps to protect the edges from damage, while also providing a finished look to the piece. When applying edge banding to a rounded hole, there are a few additional steps that need to be taken to ensure a proper fit.

Materials you will need:
Edge banding
Hot melt glue
Heat gun
Trimming tool
Sandpaper

Instructions:
Choose the right edge banding. The thickness and material of the edge banding should be compatible with the substrate you are using. For rounded holes, it is best to use a thin, flexible edge banding that will conform to the curve.
Cut the edge banding to size. The edge banding should be long enough to wrap around the entire circumference of the hole, with a little extra to overlap.
Apply hot melt glue to the edge of the hole. Use a heat gun to melt the glue and then apply it evenly to the edge of the hole.
Apply the edge banding. Line up the edge banding with the edge of the hole and press it into place. Use your fingers to smooth out any wrinkles or bubbles.
Trim the excess edge banding. Once the edge banding is in place, use a trimming tool to cut off any excess material.
Sand the edge banding. Use sandpaper to smooth the edges of the edge banding and blend it in with the substrate.

Here are some additional tips for applying edge banding to a rounded hole:
If the hole is very large, you may need to use multiple pieces of edge banding to cover it. Simply overlap the pieces and trim them as necessary.
Be careful not to apply too much hot melt glue, as this can cause the edge banding to wrinkle or bubble.
If you are having trouble getting the edge banding to stick, you can try using a tack cloth to clean the surface before applying the glue.

With a little practice, you can easily apply edge banding to a rounded hole. This will help to protect the edge of the hole from damage and give your project a finished look.

2024-10-22

Previous：Why You Need Edging Strips for Your Furniture and How to Use Them

Next：How to Use Edge Banding and Trims