How to Use Edge Banding to Seal the Edges of Garment Fabric365

Edge banding is a thin strip of material applied to the edges of fabric to conceal raw edges, prevent fraying, and enhance the garment's appearance. It is commonly used in garment construction, particularly on hems, seams, and other areas where exposed raw edges are undesirable.

Choosing the right edge banding for your garment fabric is crucial. The material, width, and color should complement the fabric and enhance the garment's overall look. Common edge banding materials include fabric, ribbon, bias tape, and fusible interfacing.

Once you have selected the appropriate edge banding, you can begin the sealing process. Here is a step-by-step guide on how to use edge banding to seal the edges of garment fabric:

Materials You'll Need:* Edge banding material
* Iron
* Ironing board
* Scissors
* Measuring tape or ruler
* Fabric glue (optional)

Instructions:1. Measure and cut: Determine the length of edge banding needed by measuring the edge of the fabric you want to seal. Cut a strip of edge banding that is slightly longer than the measured length.
2. Fold and press: Fold the edge banding in half lengthwise, with the wrong sides together. Press it with an iron on a low heat setting to create a crease.
3. Apply fabric glue (optional): If desired, apply a thin line of fabric glue along the folded edge of the edge banding. This will help secure it to the fabric.
4. Align and pin: Place the edge banding on the edge of the fabric, aligning the raw edge of the fabric with the folded edge of the edge banding. Use pins to hold it in place.
5. Iron or sew: Press the edge banding onto the fabric with an iron on a low heat setting. Hold the iron in place for a few seconds to allow the adhesive to bond. Alternatively, you can sew the edge banding to the fabric using a sewing machine.
6. Trim excess: Once the edge banding is secured, trim any excess material from the ends.
7. Finish ends: If the ends of the edge banding are exposed, you can tuck them under the fabric or fold them over and stitch them down.

Tips:* For a seamless finish, use an edge banding material that matches the color and texture of the fabric.
* To create a more decorative edge, opt for an edge banding with a contrasting color or pattern.
* Use a steam iron to prevent scorching the fabric or edge banding.
* If you are using a fusible interfacing as edge banding, follow the specific instructions provided by the manufacturer.
* For added durability, use a sewing machine to stitch the edge banding to the fabric.
By following these steps, you can effectively use edge banding to seal the edges of your garment fabric, creating a professional and polished finish.

2024-10-23

Previous：How to Apply Edge Banding to Raised Double-Sided Panels

Next：What You Need to Know About Using Ceramic Tile Edge Trim for Windows