How to Edgeband Cabinet Drawers338

Edgebanding is a process of applying a thin strip of material to the exposed edges of plywood or MDF to give it a finished look and protect it from moisture and wear. It can also be used to create decorative accents or to match the color of the cabinet. There are a few different ways to edgeband cabinet drawers, depending on the type of edgebanding material you are using and the tools you have available.

Method 1: Using Pre-Glued Edgebanding

Pre-glued edgebanding is the easiest type of edgebanding to use, as it comes with a pre-applied layer of glue. Simply apply the edgebanding to the edge of the drawer and smooth it down with a cloth. The glue will bond the edgebanding to the drawer in a few minutes.

Method 2: Using Glue-On Edgebanding

Glue-on edgebanding does not come with a pre-applied layer of glue, so you will need to apply your own glue to the edge of the drawer before applying the edgebanding. This type of edgebanding is a little more difficult to use than pre-glued edgebanding, but it gives you more control over the glue application.

Method 3: Using Iron-On Edgebanding

Iron-on edgebanding is a type of edgebanding that is activated by heat. To use iron-on edgebanding, simply apply the edgebanding to the edge of the drawer and smooth it down with a hot iron. The heat from the iron will activate the glue and bond the edgebanding to the drawer.

Tips for Edgebanding Cabinet Drawers
Choose the right type of edgebanding for your project. Pre-glued edgebanding is the easiest to use, but glue-on edgebanding gives you more control over the glue application. Iron-on edgebanding is a good option if you want to create a seamless look.
Make sure the edge of the drawer is clean and free of dust and debris before applying the edgebanding. This will help the glue to bond properly.
Apply the edgebanding evenly to the edge of the drawer. If you are using glue-on edgebanding, make sure to apply a thin, even layer of glue to the edge of the drawer before applying the edgebanding.
Smooth down the edgebanding with a cloth or a roller. This will help to activate the glue and ensure a strong bond.
Trim any excess edgebanding with a sharp knife or a utility knife.

2024-10-23

Previous：How to Install Base Moldings with a Tongue and Groove Joint

Next：How to Edge Band a Curved Hole Perfectly