What is the Best Size Edge Banding for Plywood?294

Edge banding is an essential component of plywood furniture construction. It provides a finished look to the edges of the plywood, protects the core from moisture and damage, and can also help to strengthen the joint. When choosing edge banding for plywood, it is important to select the right size for the thickness of the plywood you are using. Edge banding that is too thin will not provide adequate protection, while edge banding that is too thick will be difficult to apply and may not adhere properly.

The most common thickness of edge banding for plywood is 1/2 inch. This size is suitable for plywood that is 1/2 inch thick or less. For plywood that is thicker than 1/2 inch, you will need to use edge banding that is at least 3/4 inch thick. You can also use 1-inch thick edge banding for plywood that is 1 inch thick or more.

In addition to the thickness, you also need to consider the width of the edge banding. The width of the edge banding should be slightly wider than the thickness of the plywood. This will ensure that the edge banding will overlap the edges of the plywood and provide a finished look. The most common width of edge banding for plywood is 1-1/2 inches. This size is suitable for most plywood applications.

Once you have selected the right size edge banding for your plywood, you can begin the application process. First, apply a thin layer of wood glue to the edge of the plywood. Next, position the edge banding on the plywood and press it into place. Use a roller or a hammer to ensure that the edge banding is firmly attached. Once the edge banding is in place, you can trim off any excess material and sand the edges smooth.

By following these steps, you can ensure that your plywood furniture will have a professional-looking finish that will last for years to come.

2024-10-27

Previous：[How to Prevent Wood Veneer Edge Banding from Peeling Off]

Next：Why Edge Banding Should Not Be Cut Beforehand