How to Bend Edge Banding224

##
Edge banding is a thin strip of material that is applied to the edges of wood panels to cover the exposed core and create a finished look. It is available in a variety of materials, including wood, plastic, and metal. Edge banding can be bent to create curves or rounded corners, which can add a touch of elegance to any project.


Bending Edge Banding
There are two main ways to bend edge banding:
1. Hot bending: This method uses heat to soften the edge banding, making it more pliable. The edge banding is then bent around a form to create the desired shape.
2. Cold bending: This method does not use heat. Instead, the edge banding is gradually bent around a form until it reaches the desired shape.


Hot Bending
Hot bending is the faster and easier of the two methods, but it requires more specialized equipment. To hot bend edge banding, you will need a heat gun or a bending iron.
1. Heat the edge banding: Hold the heat gun or bending iron a few inches away from the edge banding and move it back and forth until the edge banding becomes soft and pliable.
2. Bend the edge banding: Once the edge banding is soft, bend it around a form to create the desired shape. Hold the edge banding in place until it cools and hardens.


Cold Bending
Cold bending is a more time-consuming process than hot bending, but it does not require any specialized equipment. To cold bend edge banding, you will need a bending form and a pair of pliers.
1. Prepare the bending form: The bending form should be the same shape as the desired bend in the edge banding. You can make a bending form from wood, metal, or even cardboard.
2. Clamp the edge banding to the bending form: Use pliers to clamp the edge banding to the bending form. Make sure that the edge banding is held securely in place.
3. Bend the edge banding: Gradually bend the edge banding around the bending form until it reaches the desired shape. Be careful not to bend the edge banding too sharply, as this could cause it to break.


Tips for Bending Edge Banding
Here are a few tips for bending edge banding:
* Use a sharp blade to cut the edge banding. This will help to prevent the edge banding from tearing when it is bent.
* Test the bend on a scrap piece of edge banding before bending the actual piece. This will help you to determine the correct amount of heat or pressure to use.
* Bend the edge banding slowly and carefully. This will help to prevent the edge banding from breaking.
* If the edge banding does break, you can repair it using wood filler or epoxy.


Conclusion
Bending edge banding is a relatively easy process that can be used to create curves or rounded corners on wood panels. By following the tips in this article, you can achieve professional-looking results.

2024-11-02

---

Previous：Is Furniture Edge Banding Worth It? A Comprehensive Guide for Value-Conscious Buyers

Next：How to Trim Trimming Band Burrs