How to Fix Degumming of Edging Strips in Zhuhai44
Degumming refers to the phenomenon that the edging strips fall off due to the loss of bonding strength between the edging strip and the board. The main reasons for this phenomenon are as follows:
Poor quality of edging strips: If the quality of the edging strips is not good, the adhesive layer will be thinner and the bonding strength will be lower, which will easily lead to degumming.
Improper installation: If the edging strips are not properly installed, there will be gaps between the edging strips and the board, which will provide a channel for moisture to enter, causing the adhesive layer to lose its bonding strength and degumming.
Environmental factors: If the environment is humid or the temperature is too high, it will accelerate the aging of the adhesive layer and reduce its bonding strength, which may also lead to degumming.
To solve this problem, we need to find the cause of degumming and take corresponding measures to solve it:
Check the quality of the edging strips: If the edging strips are of poor quality, they need to be replaced with edging strips of better quality.
Install the edging strips properly: When installing the edging strips, the surface of the board must be kept clean and dry, and the edging strips must be pressed tightly against the board to ensure that there are no gaps.
Control the environmental factors: If the environment is humid or the temperature is too high, it is necessary to take measures to control the humidity and temperature to create a suitable environment for the installation and use of the edging strips.
In addition, we can also use some special adhesives to enhance the bonding strength between the edging strip and the board, such as hot melt adhesive or structural adhesive. These adhesives have strong bonding strength and can effectively prevent degumming.
By taking the above measures, we can effectively solve the problem of degumming of edging strips in Zhuhai, ensure the quality of furniture, and prolong the service life of furniture.
Additional Tips to Prevent Degumming of Edging Strips
In addition to the measures mentioned above, here are some additional tips to prevent degumming of edging strips:
Choose edging strips with a thicker adhesive layer.
Use a heat gun to heat the adhesive layer before installation to enhance its bonding strength.
Apply a primer to the surface of the board before installing the edging strips to improve adhesion.
Use a rubber roller to press the edging strips tightly against the board after installation.
Avoid exposing the edging strips to direct sunlight or high temperatures for a long time.
By following these tips, you can effectively prevent degumming of edging strips and ensure the quality and durability of your furniture.
2024-11-11
Previous:Why Edge Banding Keeps Falling Off: A Comprehensive Guide from a Chinese Factory

Is Edge Banding Difficult to Remove? A Chinese Manufacturer‘s Perspective
https://www.znhssj.com/113138.html

The Ultimate Guide to Cutting Edge Banding: A Comprehensive Illustrated Tutorial for Furniture Makers
https://www.znhssj.com/113137.html

Tile Edge Banding Suppliers in Chengdu: A Leading Chinese Manufacturer
https://www.znhssj.com/113136.html

Choosing the Right Width for Your Wood Edge Banding: A Comprehensive Guide
https://www.znhssj.com/113135.html

Revolutionizing Edge Banding: A Deep Dive into Hole Punching Machinery for the Furniture Industry
https://www.znhssj.com/113134.html
Hot

Wardrobe Edge Banding: A Superior Alternative to Edge Tape?
https://www.znhssj.com/111466.html

How to Use Edge Banding Trimming Clamps: A Comprehensive Guide from a Chinese Manufacturer
https://www.znhssj.com/110583.html

Do Wardrobe Sides Need Edge Banding? A Comprehensive Guide from a Chinese Edge Banding Factory
https://www.znhssj.com/110203.html

How to Achieve Perfect Edge Banding: Troubleshooting White Glue and Banding Issues
https://www.znhssj.com/108513.html

How to Install Edge Banding on Furniture: A Comprehensive Illustrated Guide
https://www.znhssj.com/101849.html