How to Install Wardrobe Edge Stripping63

Edge banding is an essential component of any wardrobe or cabinet, providing both protection and a finished look. A well-installed edge band can prevent moisture from damaging the exposed edges of the wood and can also help to keep the wardrobe looking neat and tidy. Here is a step-by-step guide on how to install wardrobe edge banding:

Materials You'll Need
Wardrobe edge banding
Adhesive (water-based or hot melt)
Adhesive roller or brush
Trimmer
Measuring tape
Pencil

Step 1: Prepare the Wardrobe

Before you begin, you need to prepare the wardrobe. This involves cleaning the edges of the wardrobe to remove any dirt or dust that could interfere with the adhesive. You should also make sure that the edges are dry and free of any moisture.

Step 2: Measure and Cut the Edge Banding

Next, you need to measure and cut the edge banding to the desired length. Use a measuring tape to measure the length of the edge and then cut the edge banding to the correct size using a trimmer. Be sure to cut the edge banding slightly longer than the edge of the wardrobe, as you can trim it down to the correct size later.

Step 3: Apply the Adhesive

Once you have measured and cut the edge banding, you need to apply the adhesive. You can use either water-based or hot melt adhesive, depending on your preference. If you are using water-based adhesive, apply it to the back of the edge banding using an adhesive roller or brush. If you are using hot melt adhesive, apply it to the back of the edge banding using a hot melt glue gun.

Step 4: Install the Edge Banding

Once the adhesive has been applied, you can install the edge banding. To do this, simply align the edge banding with the edge of the wardrobe and press it into place. Use a cloth or a rubber roller to firmly press the edge banding into place. Be sure to smooth out any wrinkles or bubbles in the edge banding.

Step 5: Trim the Edge Banding

Once the edge banding has been installed, you need to trim it down to the correct size. To do this, use a trimmer to cut off any excess edge banding. Be sure to cut the edge banding flush with the edge of the wardrobe.

Step 6: Clean Up

Once you have trimmed the edge banding, you need to clean up any excess adhesive. You can use a damp cloth or a solvent to remove any excess adhesive. Be sure to allow the adhesive to dry completely before using the wardrobe.

Tips
Use a sharp trimmer to cut the edge banding. This will help to ensure a clean and precise cut.
Be sure to apply the adhesive evenly to the back of the edge banding. This will help to ensure a strong bond.
Press the edge banding into place firmly. This will help to ensure that the edge banding adheres properly to the wardrobe.
Trim the edge banding flush with the edge of the wardrobe. This will help to give the wardrobe a finished look.

2024-09-30

Previous：How to Glue Wood Flooring Edging Strips

Next：How to Install Black Ceramic Tile Edge Trim