How to Measure Edge Banding194

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, MDF, and other wood-based panels. It is used to cover the raw edge of the panel, providing a finished and professional look. Edge banding also helps to protect the panel from moisture and damage.

When choosing edge banding, it is important to select the correct width and thickness. The width of the edge banding should be slightly wider than the thickness of the panel. The thickness of the edge banding should be at least 1/16 inch, but it can be thicker if desired.

Once you have selected the correct edge banding, you need to measure the length of the exposed edge of the panel. To do this, use a measuring tape to measure the length of the edge from one end to the other. Be sure to measure the entire length of the edge, including any curves or angles.

Once you have measured the length of the exposed edge, you need to cut the edge banding to the correct length. To do this, use a sharp knife or a razor blade to cut the edge banding. Be sure to cut the edge banding straight and evenly.

Once the edge banding is cut to the correct length, you need to apply it to the exposed edge of the panel. To do this, use a wood glue or a contact cement to apply the edge banding to the panel. Be sure to apply the glue or cement evenly to the entire surface of the edge banding.

Once the edge banding is applied to the panel, you need to press it firmly into place. To do this, use a rubber roller or a hand roller to press the edge banding into the panel. Be sure to apply even pressure to the entire surface of the edge banding.

Once the edge banding is pressed into place, you need to trim the excess. To do this, use a sharp knife or a razor blade to trim the excess edge banding. Be sure to trim the edge banding flush with the surface of the panel.

Once the excess edge banding is trimmed, you need to finish the edge banding. To do this, you can use a sanding block or a sanding sponge to sand the edge banding. Be sure to sand the edge banding smooth and even.

Once the edge banding is finished, you can enjoy the beautiful and professional look of your finished project.

2024-11-25

Previous：How to Achieve Perfect Flush Edge Banding

Next：How to Get the Perfect Black Edge for Veneered Furniture