How to Insert an Edge Banding Strip223

Edge banding strips are a great way to finish the edges of your furniture and give it a professional look. They are available in a variety of materials, including wood, plastic, and metal, and can be applied with a variety of tools. In this article, we will show you how to insert an edge banding strip using a hand-held router.

Materials You Will Need* Edge banding strip
* Hand-held router
* Flush trim bit
* Router table
* Clamps
* Sandpaper
* Wood filler

Step-by-Step Instructions1. Cut the edge banding strip to length. The strip should be long enough to cover the entire edge of the furniture piece.
2. Apply adhesive to the back of the edge banding strip. You can use a variety of adhesives, including wood glue, contact cement, or hot melt glue.
3. Align the edge banding strip with the edge of the furniture piece. Make sure the strip is flush with the edge and that there are no gaps.
4. Clamp the edge banding strip in place. Use clamps to hold the strip in place while the adhesive dries.
5. Route the edge banding strip. Use a hand-held router with a flush trim bit to trim the excess edge banding strip. Be careful not to cut into the furniture piece.
6. Sand the edge banding strip. Use sandpaper to smooth the edge of the edge banding strip.
7. Apply wood filler. If there are any gaps between the edge banding strip and the furniture piece, fill them with wood filler.
8. Sand the wood filler. Once the wood filler has dried, sand it smooth.
9. Finish the edge banding strip. You can finish the edge banding strip with a variety of finishes, including paint, stain, or varnish.

Tips* Use a sharp router bit to get a clean cut.
* If you are using a hand-held router, be sure to hold the router firmly and keep your fingers away from the bit.
* If you are using a router table, be sure to set the fence to the correct height.
* Clamp the edge banding strip in place securely to prevent it from moving while you are routing it.
* Sand the edge banding strip thoroughly to get a smooth finish.
* Use a finish that is compatible with the edge banding strip and the furniture piece.

2024-12-01

Previous：How to Apply Glue to Edge Banding

Next：How to Choose the Best Edge Banding for Your Furniture