How to Cut Veneer Edge Banding21

Veneer edge banding is a thin strip of wood or other material that is applied to the edges of plywood or other substrates to create a finished, professional-looking edge. It is available in a variety of colors and styles, so you can match it to the rest of your furniture or décor. Cutting veneer edge banding is a relatively easy task, but there are a few things you need to know to get the best results.

Tools You Will Need* Veneer edge banding
* Utility knife
* Sharp scissors
* Measuring tape or ruler
* Pencil or marking tool
* Sandpaper
* Tack cloth

Steps1. Measure the length of the edge you need to cover and cut a piece of veneer edge banding to that length. It is better to cut the piece a little too long than too short.
2. Apply a thin layer of wood glue to the edge of the substrate.
3. Position the veneer edge banding on the edge of the substrate and press it into place.
4. Use the utility knife to trim the excess veneer edge banding from the ends.
5. Use the scissors to trim any excess veneer edge banding that is overhanging the edges of the substrate.
6. Sand the edges of the veneer edge banding flush with the substrate.
7. Wipe away any dust with a tack cloth.

Tips* Use a sharp utility knife or scissors to get a clean cut.
* If the veneer edge banding is too thick, you can sand it down to the desired thickness.
* If the veneer edge banding is too thin, you can apply multiple layers.
* You can use a variety of different types of glue to apply veneer edge banding. Wood glue is a good choice for most applications.
* If you are applying veneer edge banding to a curved surface, you can use a heat gun to soften the veneer so that it can be bent to fit.
* Veneer edge banding is a great way to add a finished look to your furniture or décor. With a little practice, you can cut and apply veneer edge banding like a pro!

2024-12-03

Previous：How Edge Banding Connects: A Comprehensive Guide

Next：Furniture Edge Banding Expo: A Showcase of Innovation and Excellence