How to Fix Overhanging Edge Banding on Chinese Furniture76

Edge banding is a thin strip of material that is applied to the edges of furniture to cover the raw edges of the wood. It can be made from a variety of materials, including wood, plastic, and metal. Edge banding helps to protect the furniture from moisture and damage, and it can also improve the appearance of the piece.

However, sometimes edge banding can become loose or damaged, causing it to overhang the edge of the furniture. This can be a unsightly and it can also create a tripping hazard. If you have overhanging edge banding, there are a few things you can do to fix it.

1. Trim the Overhang

The simplest way to fix overhanging edge banding is to trim it off. You can use a sharp utility knife or a razor blade to carefully cut the excess material. Be sure to cut straight and close to the edge of the furniture. If you cut too much, you will create a gap between the edge banding and the furniture.

2. Re-glue the Edge Banding

If the edge banding is loose but not damaged, you can try to re-glue it. Apply a thin layer of wood glue to the back of the edge banding and press it firmly into place. Use a clamp to hold the edge banding in place while the glue dries. Be sure to wipe off any excess glue that squeezes out.

3. Replace the Edge Banding

If the edge banding is damaged or cannot be repaired, you will need to replace it. To do this, you will need to remove the old edge banding. You can use a heat gun to soften the glue and then carefully pry the edge banding off with a putty knife. Once the old edge banding is removed, you can apply new edge banding using the same steps as described above.

4. Prevent Overhanging Edge Banding

There are a few things you can do to prevent overhanging edge banding from happening in the first place. First, be sure to use high-quality edge banding that is the correct size for your furniture. Second, apply the edge banding carefully and evenly. Finally, use a clamp to hold the edge banding in place while the glue dries.

By following these tips, you can keep your furniture looking its best and avoid the unsightly and dangerous problem of overhanging edge banding.

2024-12-13

Previous：How to Install Edge Banding on Curved Edges

Next：How to Choose the Right Edge Banding Trimmer