[Closet Edge Banding Trim Video] How to Apply Veneer Edge Banding to Plywood396

Are you looking for a way to give your closet a finished, professional look? Veneer edge banding is a great way to do just that. It's a thin strip of wood that is applied to the edges of plywood, giving it a seamless, polished appearance.

In this video, we'll show you how to apply veneer edge banding to plywood using a hot melt adhesive. This is a relatively simple process that can be completed in just a few hours.

Materials You'll Need* Veneer edge banding
* Hot melt adhesive
* Edge bander machine
* Trim router
* Sandpaper
* Tack cloth

Instructions1. Start by cutting the edge banding to the desired length.
2. Apply a thin layer of hot melt adhesive to the edge of the plywood.
3. Position the edge banding on the plywood and press it into place.
4. Use an edge bander machine to trim the excess edge banding.
5. Use a trim router to round over the edges of the edge banding.
6. Sand the edges of the edge banding to smooth them out.
7. Wipe down the edges of the edge banding with a tack cloth to remove any dust.

Tips* Use a high-quality veneer edge banding for best results.
* Be careful not to apply too much hot melt adhesive, as this can cause the edge banding to pucker.
* If you don't have an edge bander machine, you can use a hand-held router to trim the excess edge banding.
* Be sure to sand the edges of the edge banding to smooth them out and remove any sharp edges.

ConclusionVeneer edge banding is a great way to give your closet a finished, professional look. It's a relatively simple process that can be completed in just a few hours. By following the instructions in this video, you can easily apply veneer edge banding to your plywood and give your closet a new lease on life.

2024-12-13

Previous：[SOLVED]: Edge Banding Not Trimming Cleanly? Here‘s How to Troubleshoot

Next：How to Fix Edge Banding Missing Edges