How to Calculate the Thickness and Width of Edge Banding Strips157

Edge banding strips are thin strips of material that are applied to the edges of panels and other components to create a finished look. They come in a variety of thicknesses and widths, and the correct size will depend on the application.

Thickness

The thickness of an edge banding strip is determined by the thickness of the material being edged. The strip should be slightly thicker than the material, so that it can be flush with the surface when applied. For example, if the material being edged is 18mm thick, a 2mm thick edge banding strip would be appropriate.

Edge banding strips are typically available in thicknesses of 0.5mm, 1mm, 2mm, and 3mm. The thicker strips are more durable and can withstand more wear and tear, but they are also more difficult to apply. The thinner strips are easier to apply, but they are not as durable.

Width

The width of an edge banding strip is determined by the width of the edge being covered. The strip should be wide enough to cover the entire edge, and it should overhang the edge by about 1mm on each side. For example, if the edge being covered is 20mm wide, a 22mm wide edge banding strip would be appropriate.

Edge banding strips are typically available in widths of 16mm, 19mm, 22mm, and 25mm. The wider strips are more visible, but they provide a more finished look. The narrower strips are less visible, but they are not as durable.

Calculating the Correct Size

To calculate the correct size of edge banding strip for your application, you will need to measure the thickness and width of the edge being covered. Once you have these measurements, you can use the following formula to calculate the correct size:```
Thickness = Thickness of material + 0.5mm
Width = Width of edge + 2mm
```

For example, if the material being edged is 18mm thick and the edge being covered is 20mm wide, the correct size of edge banding strip would be 2mm thick and 22mm wide.

Conclusion

Choosing the correct size of edge banding strip is important to ensure a finished and professional look. By following the steps outlined above, you can calculate the correct size for your application.

2024-12-14

Previous：How to Adjust Edge Banding Trimming

Next：Does Edge Banding Wrap Around?