Can You Re-Edge Laminate Edging?139

As a leading manufacturer of laminate edging in China, we're frequently asked whether it's possible to re-edge laminate edging. The answer is yes, it is possible, but there are several important factors to consider before attempting this process.

Here are some things to keep in mind about laminate edging:
Laminate edging is made by bonding a layer of decorative paper to a substrate made of particleboard or MDF (Medium Density Fibreboard)
The paper is usually impregnated with a resin that is cured under high heat and pressure
The resulting material is a durable, moisture-resistant surface that is well-suited for use on furniture and other woodworking projects

When laminate edging is installed, it is typically glued to the edge of the panel using a contact adhesive. This adhesive creates a strong bond between the edging and the panel, but it can be difficult to remove if the edging needs to be replaced. This makes re-edging laminate edging somewhat more difficult than re-edging other materials, such as plastic or wood.

If you are considering re-edging laminate edging, it is important to take the following steps:
Remove the old edging. This can be done using a utility knife or a heat gun. Be careful not to damage the panel or the substrate.
Prepare the surface of the panel. This may involve sanding the edge of the panel or cleaning it with a solvent.
Apply a contact adhesive to the surface of the panel. Be sure to follow the manufacturer's instructions.
Align the new edging with the edge of the panel and press it into place. Use a roller or a block of wood to apply even pressure.
Allow the adhesive to cure. This may take several hours or even days, depending on the type of adhesive used.

Re-edging laminate edging can be a challenging process but it can be successful if it is done carefully. By following these steps, you can ensure that your re-edged laminate edging looks great and lasts for years to come.

Here are some additional tips for re-edging laminate edging:
Use a sharp utility knife or a heat gun to remove the old edging. If you use a heat gun, be careful not to overheat the panel or the substrate.
Be sure to prepare the surface of the panel before applying the new edging. This may involve sanding the edge of the panel or cleaning it with a solvent.
Apply a contact adhesive to the surface of the panel and the back of the new edging. Be sure to follow the manufacturer's instructions.
Align the new edging with the edge of the panel and press it into place. Use a roller or a block of wood to apply even pressure.
Allow the adhesive to cure for several hours or even days before using the panel.

With a little care and attention, you can re-edge laminate edging and give your furniture a new look that will last for years to come.

2024-12-17

Previous：Does Ruhao Edge Banding Only Accept Laser Edging?

Next：How to Use a Portable Edge Bander with Pre-Glued Edge Banding