Why the Edge Banding Breaks When the Edge Banding Machine is Edge Banding31

The edge banding machine is used to seal the edge of the board. When the edge banding machine is working, the edge banding is often broken. This is a very annoying problem. Especially in the production process, the edge banding suddenly breaks, which will definitely affect the progress of the production and even cause the machine to stop working. There are many reasons for the breaking of the edge banding. Here are some common reasons and solutions.

1. The edge banding is not of good quality.

The quality of the edge banding is not good, and the toughness is not enough. When the edge banding is bent, it is easy to break. Therefore, when choosing the edge banding, you should choose the edge banding with good quality and high toughness.

2. The temperature of the edge banding machine is too high.

The temperature of the edge banding machine is too high, which will cause the edge banding to soften and break easily. Therefore, the temperature of the edge banding machine should be adjusted to the appropriate temperature. Generally speaking, the temperature is between 150 and 200 degrees Celsius.

3. The pressure of the edge banding machine is too large.

The pressure of the edge banding machine is too large, which will cause the edge banding to be squeezed and broken. Therefore, the pressure of the edge banding machine should be adjusted to the appropriate pressure. Generally speaking, the pressure is between 0.5 and 1.0 MPa.

4. The speed of the edge banding machine is too fast.

The speed of the edge banding machine is too fast, which will cause the edge banding to be stretched and broken. Therefore, the speed of the edge banding machine should be adjusted to the appropriate speed. Generally speaking, the speed is between 10 and 20 meters per minute.

5. The edge banding machine is not sharp enough.

The edge banding machine is not sharp enough, which will cause the edge banding to be cut unevenly and easily broken. Therefore, the edge banding machine should be sharpened regularly.

6. The edge banding is not properly installed.

The edge banding is not properly installed, which will cause the edge banding to be loose and easily broken. Therefore, the edge banding should be installed correctly. Generally speaking, the edge banding should be installed on the edge of the board with a gap of 0.1 to 0.2 mm.

In addition to the above reasons, the breaking of the edge banding may also be caused by other factors. Therefore, when the edge banding breaks, you should check all aspects carefully to find out the cause and take corresponding measures to solve it.

2024-12-17

Previous：Why the Edge of the Veneer Shows White after Veneering?

Next：Which Is Better: TPE or Silicone Edge Banding?