How Many Degrees Should an Automatic Edge Bander Trim a Strip on?161

As a leading edge banding strip manufacturer in China, we often get asked about the optimal trimming angle for automatic edge banders. The angle at which the edge banding strip is trimmed affects the overall appearance and durability of the finished product, so it's important to get it right.

In general, the trimming angle should be between 0.8 and 2 degrees. This angle will create a clean, precise cut that will help to prevent the edge banding strip from peeling or chipping over time. However, the optimal angle may vary slightly depending on the type of edge banding strip being used and the specific application.

For example, thicker edge banding strips may require a slightly larger trimming angle to achieve a clean cut. Conversely, thinner edge banding strips may require a smaller trimming angle to avoid over-trimming.

It's also important to consider the type of substrate that the edge banding strip is being applied to. Softer substrates, such as wood, may require a smaller trimming angle to avoid tearing the surface of the substrate. Harder substrates, such as metal, may require a larger trimming angle to achieve a clean cut.

Ultimately, the best way to determine the optimal trimming angle for an automatic edge bander is to experiment with different angles until you find one that produces the desired results. However, the following guidelines can serve as a starting point:
For PVC edge banding strips, a trimming angle of 1-2 degrees is typically recommended.
For ABS edge banding strips, a trimming angle of 0.8-1.5 degrees is typically recommended.
For melamine edge banding strips, a trimming angle of 0.8-1.2 degrees is typically recommended.

Once you have determined the optimal trimming angle for your specific application, you can adjust the settings on your automatic edge bander accordingly. By following these guidelines, you can help to ensure that your edge banding strips are trimmed to the correct angle, resulting in a finished product that is both beautiful and durable.

2024-12-17

Previous：How to Use Hot Melt Glue to Edge Band Without an Adhesive Edge Banding

Next：Machine Edge Banding: Can You Change the Edge Banding Too?