How to Finish the End of Round Edge Banding on Door Openings363

When finishing the end of round edge banding on door openings, there are a few different methods that can be used to achieve a clean and professional look. The most common method is to use a coping saw to cut a 45-degree angle on the end of the banding. This will create a mitered joint that will be flush with the edge of the door opening.

To make a mitered joint, first use a measuring tape to determine the length of the banding that you need. Then, use a coping saw to cut a 45-degree angle on one end of the banding. Next, apply a small amount of wood glue to the mitered edge of the banding. Then, carefully align the banding with the edge of the door opening and press it into place. Use a nail gun or a hammer and nails to secure the banding in place.

Another method for finishing the end of round edge banding on door openings is to use a hand router. This method is more difficult than using a coping saw, but it can produce a more precise finish. To use a hand router, first use a measuring tape to determine the length of the banding that you need. Then, use a hand router to cut a rabbet joint on the end of the banding. The rabbet joint should be the same width as the thickness of the banding.

Next, apply a small amount of wood glue to the rabbet joint on the banding. Then, carefully align the banding with the edge of the door opening and press it into place. Use a nail gun or a hammer and nails to secure the banding in place. Once the banding is in place, use a wood filler to fill in the rabbet joint. Then, sand the wood filler smooth and apply a finish to the banding.

No matter which method you choose, be sure to take your time and make sure that the banding is properly secured. A well-finished edge banding job will add a touch of elegance to your door openings.

Here are some additional tips for finishing the end of round edge banding on door openings:
Use a sharp blade on your coping saw or hand router.

2024-12-17

Previous：How to Fix Uneven Edging When Using Solid Wood Edging Strips

Next：Can Cabinet Edge Banding Be Re-edged If It Comes Loose?