How to Adjust Edge Banding for Sewing Machine Edge Banding189

Edge banding is a thin strip of material that is applied to the edges of a workpiece to provide a finished look and protect the core material from moisture and damage. Edge banding can be applied using a variety of methods, but one of the most common is to use a sewing machine.

When using a sewing machine to apply edge banding, it is important to have the machine properly adjusted in order to ensure that the banding is applied evenly and securely. The following steps will show you how to adjust your sewing machine for edge banding:
Choose the correct needle. The type of needle that you use will depend on the thickness and type of edge banding that you are using. For most edge banding applications, a universal needle with a size of 14 or 16 will be sufficient.
Adjust the stitch length. The stitch length should be short enough to hold the edge banding securely in place, but not so short that the stitches are too tight and cause the banding to pucker. A stitch length of 2 to 3 millimeters is typically a good starting point.
Adjust the presser foot pressure. The presser foot pressure should be adjusted so that the presser foot holds the edge banding firmly against the workpiece, but not so tightly that the banding is crushed or deformed. A good starting point is to set the presser foot pressure to medium.
Test the settings. Once you have made the necessary adjustments, it is important to test the settings on a scrap piece of material before beginning to apply the edge banding to your workpiece. This will help you to ensure that the settings are correct and that the edge banding will be applied properly.

Once you have adjusted your sewing machine for edge banding, you can begin to apply the banding to your workpiece. To do this, simply follow these steps:
Apply a thin layer of glue to the edge of the workpiece. This will help to hold the edge banding in place.
Align the edge banding with the edge of the workpiece. Make sure that the banding is flush with the edge of the workpiece and that there are no gaps.
Sew the edge banding in place. Use a straight stitch and the settings that you determined in the previous step.
Trim the excess edge banding. Once the edge banding has been sewn in place, use a sharp knife or scissors to trim any excess banding that is hanging over the edge of the workpiece.

By following these steps, you can use a sewing machine to apply edge banding to your workpieces and achieve a professional-looking finish.

2024-12-23

Previous：How to Manually Apply Hot Melt Edge Banding

Next：Can Edge Banding Bend 90 Degrees for Edge Sealing?