How China‘s Edge Banding Strips Are Attached to Furniture48

Edge banding strips, also known as lipping or banding, are long, thin strips of material that are applied to the exposed edges of furniture or other wood products to enhance their appearance, protect them from damage, and hide rough or unfinished edges.
Edge banding strips can be made from a variety of materials, including wood, plastic, metal, and vinyl, with each material offering different advantages and characteristics. Wood edge banding, for example, is known for its natural beauty and durability, while plastic edge banding is more cost-effective and moisture-resistant.
The process of applying edge banding strips to furniture is relatively simple, but it does require some precision and care to ensure a strong and seamless bond. The most common method of attaching edge banding strips is by using an adhesive.

Types of Adhesive Used for Edge Banding StripsThere are two main types of adhesives that are commonly used for edge banding strips: hot melt adhesives and cold press adhesives.
* Hot melt adhesives are thermoplastic adhesives that are applied to the edge banding strip in a molten state. The adhesive is then pressed against the edge of the furniture, where it cools and solidifies, forming a strong bond.
* Cold press adhesives are liquid adhesives that are applied to the edge banding strip at room temperature. The edge banding strip is then pressed against the edge of the furniture using a press or clamp, which applies pressure and allows the adhesive to cure.

How to Apply Edge Banding Strips Using AdhesiveThe following steps provide a general overview of how to apply edge banding strips using adhesive:

1. Prepare the edge of the furniture

The edge of the furniture should be clean, dry, and free of any debris or imperfections. If necessary, the edge can be sanded or scraped to create a smooth surface.

2. Select the appropriate adhesive

The type of adhesive that you use will depend on the material of the edge banding strip and the surface of the furniture. Consult the manufacturer's instructions for the recommended adhesive.

3. Apply the adhesive to the edge banding strip

Apply a thin, even layer of adhesive to the edge of the edge banding strip. Make sure to avoid applying too much adhesive.

4. Position the edge banding strip

Align the edge banding strip with the edge of the furniture and press it into place. Use a roller or other tool to apply pressure and ensure a strong bond.

5. Allow the adhesive to cure

The curing time for the adhesive will vary depending on the type of adhesive that you are using. Consult the manufacturer's instructions for the recommended curing time.

6. Trim any excess edge banding strip

Once the adhesive has cured, use a sharp knife or other cutting tool to trim any excess edge banding strip that is overhanging the edge of the furniture.

Additional Tips for Applying Edge Banding Strips* Use a sharp knife or other cutting tool to create a clean, straight edge on the edge banding strip.
* Apply a thin, even layer of adhesive to the edge banding strip. Avoid applying too much adhesive, as this can cause the strip to wrinkle or bubble.
* Press the edge banding strip firmly into place and use a roller or other tool to apply pressure and ensure a strong bond.
* Allow the adhesive to cure completely before trimming any excess edge banding strip.
* If you are using hot melt adhesive, be sure to wear gloves and eye protection.

Common Problems and TroubleshootingHere are some common problems that can occur when applying edge banding strips, along with tips on how to troubleshoot them:
* The edge banding strip is not adhering to the furniture
* Make sure that the edge of the furniture is clean, dry, and free of any debris or imperfections.
* Use the appropriate adhesive for the material of the edge banding strip and the surface of the furniture.
* Apply a thin, even layer of adhesive to the edge banding strip and press it firmly into place.
* The edge banding strip is wrinkled or bubbly
* This can be caused by applying too much adhesive to the edge banding strip.
* Use a roller or other tool to apply pressure and smooth out any wrinkles or bubbles.
* The edge banding strip is peeling away from the furniture
* This can be caused by using the wrong type of adhesive or by not applying enough pressure when attaching the edge banding strip.
* Use the appropriate adhesive for the material of the edge banding strip and the surface of the furniture.
* Press the edge banding strip firmly into place and use a roller or other tool to apply pressure and ensure a strong bond.

2024-10-03

---

Previous：What is the Name of the Edging Strip on Glass Doors?

Next：How to Install Laminate Cabinet Edge Banding