How to Measure the Length of Edge Banding138

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, particleboard, or MDF to create a finished and professional look. It is available in a variety of materials, including wood, plastic, and metal, and can be either pre-glued or applied with a separate adhesive. When ordering edge banding, it is important to know how to measure the length you need.

The length of edge banding you need will depend on the perimeter of the piece you are edging. To measure the perimeter, use a tape measure to measure the length and width of the piece, and then add the two measurements together. For example, if the piece is 10 inches long and 5 inches wide, the perimeter would be 30 inches.

Once you know the perimeter of the piece, you can order the appropriate length of edge banding. Edge banding is typically sold in rolls of 100 feet or more, so you will need to divide the perimeter of the piece by the length of the roll to determine how many rolls you need. For example, if the perimeter of the piece is 30 inches and the roll length is 100 feet, you would need to order 0.3 rolls of edge banding.

When ordering edge banding, it is important to keep in mind that you will need to cut the banding to the correct length before applying it. To do this, measure the length of the edge you are banding and then add 1 inch to the measurement. This will give you the length of the banding you need to cut. For example, if the edge you are banding is 10 inches long, you would need to cut a piece of banding that is 11 inches long.

Once you have cut the banding to the correct length, you can apply it to the edge of the piece. If the banding is pre-glued, simply peel off the backing and press the banding into place. If the banding is not pre-glued, you will need to apply a separate adhesive to the edge of the piece before applying the banding.

Here are some additional tips for measuring and ordering edge banding:
Always measure the perimeter of the piece twice to ensure accuracy.
Order slightly more edge banding than you think you will need, just in case you make a mistake.
If you are not sure how to apply edge banding, consult with a professional.

2024-12-25

Previous：[Preheating Light of Edge Banding Shows Abnormally]

Next：How to Remove Edge Banding: A Comprehensive Guide