How to Band Old Dresser Drawers85
If you're restoring an old dresser, one of the finishing touches is to add banding to the drawer fronts. Banding is a thin strip of wood or other material that is applied to the edges of the drawer fronts, and it serves both a decorative and a functional purpose. It helps to protect the edges of the drawers from wear and tear, and it can also add a touch of style to the piece.
There are a few different ways to band drawer fronts. The most common method is to use a veneer banding. Veneer banding is a thin layer of wood that is applied to the drawer fronts using an adhesive. Once the adhesive has dried, the banding is trimmed and sanded to create a smooth, finished edge.
Another method of banding drawer fronts is to use a solid wood banding. Solid wood banding is a thicker piece of wood that is applied to the drawer fronts using nails or screws. This method is more durable than veneer banding, but it is also more difficult to install.
No matter which method you choose, banding drawer fronts is a relatively easy project that can add a touch of style and protection to your old dresser.
Materials* Banding material (veneer, solid wood, etc.)
* Adhesive (if using veneer banding)
* Nails or screws (if using solid wood banding)
* Trim saw
* Sander
* Sandpaper
* Tack cloth
Instructions1. Measure and cut the banding material to the desired length and width.
2. If using veneer banding, apply adhesive to the back of the banding and press it into place on the drawer front.
3. If using solid wood banding, nail or screw the banding to the drawer front.
4. Trim the banding flush with the edges of the drawer front using a trim saw.
5. Sand the banding smooth using a sander and sandpaper.
6. Wipe the banding down with a tack cloth to remove any dust or debris.
Tips* When choosing a banding material, consider the style of the dresser and the desired finished look.
* If you are using veneer banding, be sure to apply the adhesive evenly to avoid any bubbles or wrinkles.
* When trimming the banding, use a sharp saw to create a clean, finished edge.
* Sand the banding smooth using a fine-grit sandpaper.
* Wipe the banding down with a tack cloth to remove any dust or debris before applying a finish.
2024-10-03
Previous:How Much Do Straight Edge Banding Strips from Liaoyang Cost?
How to Replace Furniture Edging Strips
https://www.znhssj.com/54073.html
China‘s Leading Edgebanding Manufacturer: Guigang Ruiyi Edgebanding
https://www.znhssj.com/54072.html
Do Wood Doors Have Edge Banding?
https://www.znhssj.com/54071.html
Kitchen Cabinet Crown Molding Black - Elevate Your Kitchen Design with Timeless Elegance
https://www.znhssj.com/54070.html
[High Price] Recycle PVC Edge Banding at Competitive Rates: Top Factory in China
https://www.znhssj.com/54069.html
Hot
How to Remove Laser Edging Veneer
https://www.znhssj.com/52781.html
How to Install a Laminate Flooring Quarter Round
https://www.znhssj.com/49012.html
Cabinet Edging: T-Molding or Veneer?
https://www.znhssj.com/48995.html
How to Edge Banding
https://www.znhssj.com/42828.html
How to Remove Veneer Edge Banding
https://www.znhssj.com/39541.html