How to Replace Edge Banding on Furniture58

Edge banding is a thin strip of material that is applied to the exposed edges of furniture to protect them from damage and give them a finished look. Over time, edge banding can become damaged or worn, so it is important to know how to replace it.

Tools and MaterialsTo replace edge banding, you will need the following tools and materials:
* New edge banding
* Iron or edge bander
* Trimmer
* Sandpaper
* Clean cloth

Step 1: Remove the Old Edge BandingTo remove the old edge banding, start by scoring it with a utility knife. This will help to break the adhesive bond between the edge banding and the furniture. Once the edge banding is scored, you can use a putty knife or a pair of pliers to remove it.

Step 2: Prepare the Edge of the FurnitureOnce the old edge banding is removed, you need to prepare the edge of the furniture for the new edge banding. This involves sanding the edge of the furniture to remove any rough edges or splinters.

Step 3: Apply the New Edge BandingNow it's time to apply the new edge banding. There are two different ways to do this: with an iron or with an edge bander.
- Iron: If you are using an iron, simply heat up the iron and then press the edge banding onto the edge of the furniture. Hold the iron in place for a few seconds until the edge banding has bonded to the furniture.
- Edge bander: An edge bander is a specialized machine that is used to apply edge banding. Edge banders are more efficient and accurate than using an iron, but they are also more expensive. If you are only replacing a small amount of edge banding, it is probably not worth investing in an edge bander.

Step 4: Trim the Edge BandingOnce the edge banding is applied, you need to trim it to the correct size. To do this, use a trimmer to cut off any excess edge banding.

Step 5: Sand the Edge BandingFinally, sand the edge banding to smooth it out and make it flush with the edge of the furniture.

Tips for Replacing Edge BandingHere are a few tips for replacing edge banding:
* Use a high-quality adhesive when applying the new edge banding. This will help to ensure that the edge banding stays in place for many years to come.
* If you are using an iron to apply the edge banding, be careful not to overheat it. Overheating can cause the edge banding to melt or bubble.
* If you are using an edge bander, be sure to follow the manufacturer's instructions carefully. Edge banders can be dangerous if they are not used properly.
* Replace the edge banding as soon as possible after it becomes damaged. This will help to prevent further damage to the furniture.

2024-12-28

Previous：How to Sew Silk Edge Banding: A Comprehensive Guide for Furniture Craftsmen

Next：How to Install PVC Edge Banding