How to Remove Edge Banding Glue5

Edge banding glue is a type of adhesive used to bond edge banding to the edges of furniture. It is typically a strong, durable adhesive that can withstand the rigors of everyday use. However, there may come a time when you need to remove edge banding glue, either to replace the edge banding or to repair the furniture. Here are a few tips on how to remove edge banding glue:

1. Use a heat gun. A heat gun can be used to soften the glue, making it easier to remove. Hold the heat gun about 6 inches away from the edge banding and move it back and forth until the glue begins to soften. Be careful not to overheat the glue, as this can damage the edge banding or the furniture.

2. Use a chemical stripper. A chemical stripper can also be used to soften the glue. Apply the stripper to the edge banding and let it sit for the amount of time specified on the product label. The stripper will then begin to break down the glue, making it easier to remove. Be sure to wear gloves and eye protection when using a chemical stripper, as it can be harmful to the skin and eyes.

3. Use a sharp knife. If the heat gun or chemical stripper does not work, you can try using a sharp knife to remove the glue. Be careful not to cut the edge banding or the furniture. Hold the knife at a 45-degree angle and gently scrape away the glue.

4. Use a sanding block. A sanding block can be used to remove any remaining glue residue. Sand the edge banding in the direction of the grain until the glue is removed. Be careful not to sand too hard, as this can damage the edge banding or the furniture.

Once you have removed the glue, you can either replace the edge banding or repair the furniture. If you are replacing the edge banding, be sure to use a compatible adhesive. If you are repairing the furniture, you can use wood filler or a similar product to fill in any gaps or holes.

2024-12-29

Previous：How to Measure Edge Banding Width

Next：How to Edge Band a Piece of Furniture Like a Pro