How to Deal with Furniture Edging Strips16

Furniture edging strips are an essential part of any furniture piece, as they protect the edges of the furniture from damage and wear. They also give the furniture a more finished look. However, installing furniture edging strips can be a bit tricky, and if not done properly, can actually damage the furniture. Here are a few tips on how to deal with furniture edging strips.

1. Choose the right edging strip. There are a variety of different edging strips available, so it's important to choose one that is the right size and material for your furniture. The edging strip should be the same thickness as the edge of the furniture, and it should be made of a durable material that will not easily scratch or dent. Some popular edging strip materials include wood, plastic, and metal.

2. Cut the edging strip to size. Once you have chosen an edging strip, you will need to cut it to size. To do this, measure the length of the edge of the furniture and cut the edging strip to the same length. Use a sharp knife or a saw to cut the edging strip, and be sure to cut it straight. If the edging strip is not cut straight, it will not fit properly on the furniture.

3. Apply adhesive to the edging strip. Before you apply the edging strip to the furniture, you will need to apply a thin layer of adhesive to the back of the edging strip. Use a brush or a roller to apply the adhesive, and be sure to spread it evenly. Allow the adhesive to dry for a few minutes before applying the edging strip to the furniture.

4. Apply the edging strip to the furniture. Once the adhesive has dried, you can apply the edging strip to the furniture. Start by aligning the edging strip with the edge of the furniture, and then press it into place. Use a rubber mallet or a hammer to tap the edging strip into place, and be sure to apply even pressure. Once the edging strip is in place, remove any excess adhesive that may have squeezed out.

5. Finish the edging strip. Once the edging strip is in place, you can finish it by sanding or trimming it. Sanding the edging strip will help to smooth out any rough edges, and trimming it will help to ensure that it fits properly. You can use a fine-grit sandpaper to sand the edging strip, and you can use a sharp knife or a saw to trim it. Once the edging strip is finished, you can enjoy your newly protected furniture.

2024-12-31

Previous：What Type of Glue Should I Use for Laminate Edging?

Next：How to Use Furniture Edge Banding for Flawless Edges