How to wrap a countertop edging strip?89

Countertop edging strips are a great way to finish off the edge of your countertop and give it a polished look. They are available in a variety of materials, including wood, metal, and plastic, and can be installed with a variety of tools. In this article, we will show you how to wrap a countertop edging strip using a router.

Tools and materials:
Countertop edging strip
Router
Router bit
Clamps
Wood glue
Sandpaper

Instructions:
Cut the edging strip to length. Measure the length of the edge of your countertop and cut the edging strip to that length. Be sure to cut the strip at a 45-degree angle at each end so that the ends will meet cleanly.
Apply wood glue to the edge of the countertop. Use a thin bead of wood glue to the edge of the countertop where you will be installing the edging strip.
Position the edging strip on the countertop. Align the edging strip with the edge of the countertop and press it into the wood glue. Use clamps to hold the edging strip in place while the glue dries.
Route the edge of the edging strip. Once the glue has dried, use a router to route the edge of the edging strip. This will create a smooth, finished edge.
Sand the edge of the edging strip. Use sandpaper to smooth the edge of the edging strip. Start with a coarse grit sandpaper and work your way up to a fine grit sandpaper.
Finish the edging strip. You can finish the edging strip with a variety of finishes, such as paint, stain, or varnish. Choose a finish that will complement the style of your kitchen.

Here are some additional tips for wrapping a countertop edging strip:
Be sure to use a router bit that is the same size as the edging strip.
When routing the edge of the edging strip, be sure to use a light touch. This will help to prevent the edging strip from chipping or splintering.
If you are using a wood edging strip, be sure to seal it with a clear finish to protect it from moisture.

By following these steps, you can easily wrap a countertop edging strip and give your kitchen a polished look.

2025-01-01

Previous：How to Edge Band the Back of a Screen

Next：How to Divide Jumbo Rolls of Edge Banding Accurately and Efficiently