How to Remove Old Edge Banding278

Edge banding is a thin strip of material that is applied to the edges of a piece of wood to create a finished look. It can be made from a variety of materials, including wood, plastic, and metal. Over time, edge banding can become damaged or worn, and it may need to be replaced.

Removing old edge banding can be a challenging task, but it is possible with the right tools and techniques. Here are some tips on how to do it:

1. Soften the adhesive. The first step is to soften the adhesive that is holding the edge banding in place. You can do this by applying a heat gun or hair dryer to the edge banding. Be careful not to apply too much heat, as this can damage the wood.

2. Remove the edge banding. Once the adhesive has been softened, you can start to remove the edge banding. You can use a putty knife or a sharp knife to carefully pry the edge banding loose. Be careful not to damage the wood underneath.

3. Clean the surface. Once the edge banding has been removed, you will need to clean the surface of the wood. You can use a damp cloth or a tack cloth to remove any remaining adhesive residue.

4. Apply new edge banding. Once the surface has been cleaned, you can apply new edge banding. You can use a variety of adhesives to apply the new edge banding, but I recommend using a contact adhesive. Contact adhesives are very strong and they will create a permanent bond between the edge banding and the wood.

Here are some additional tips for removing old edge banding:
If you are having difficulty removing the edge banding, you can try using a chemical solvent. Solvents can help to dissolve the adhesive and make it easier to remove.
Be careful not to damage the wood when you are removing the edge banding. If you are not sure how to do it, you can hire a professional to do it for you.
Once you have removed the old edge banding, you can apply new edge banding to create a finished look.

2025-01-04

Previous：How to Install Edging for Furniture

Next：How to Draw Lines for Custom Edge Banding