How to Remove Laminate Edging161

Laminate edging, also known as melamine or PVC edging, is a thin strip of material that is applied to the edge of a piece of wood or board to protect it from damage and to improve its appearance. Over time, however, laminate edging can become damaged or unsightly, and you may need to remove it and replace it with new edging.

There are a few different ways to remove laminate edging, depending on the type of adhesive that was used to attach it. If the adhesive is water-based, you can usually soften it with a heat gun or a hair dryer and then peel the edging off. If the adhesive is solvent-based, you will need to use a chemical stripper to dissolve it before you can remove the edging.

Here are the steps for removing laminate edging using a heat gun:1. Hold the heat gun about 2 inches away from the edge of the edging and move it back and forth until the adhesive begins to soften.
2. Use a putty knife or a scraper to carefully peel the edging away from the wood.
3. Once the edging has been removed, use a clean cloth to wipe away any remaining adhesive.

Here are the steps for removing laminate edging using a chemical stripper:1. Apply the chemical stripper to a clean cloth and wipe it over the edging.
2. Allow the stripper to sit for the amount of time specified on the product label.
3. Use a putty knife or a scraper to carefully peel the edging away from the wood.
4. Once the edging has been removed, use a clean cloth to wipe away any remaining adhesive and stripper.

Once you have removed the old laminate edging, you can install new edging using the same type of adhesive that was used to attach the old edging. If you are not sure what type of adhesive was used, you can test a small area with a different type of adhesive to see if it works.

Here are some tips for removing laminate edging:* Wear safety goggles and gloves when using a heat gun or a chemical stripper.
* Be careful not to overheat the edging, as this can damage the wood.
* If you are using a chemical stripper, be sure to follow the directions on the product label carefully.
* Do not use a sharp object to remove the edging, as this can scratch the wood.
* Be patient and take your time when removing the edging.

Additional Resources* [How to Remove Laminate Edging from Furniture](/13416606/how-to-remove-laminate-edging-from-furniture)
* [How to Remove Melamine Edging](/remove-melamine-edging-1821201)
* [How to Remove PVC Edging](/Remove-PVC-Edging)

2025-01-05

Previous：Winter Woes: Why Edging Strips Break Easily in Cold Conditions

Next：How to Apply PET Edge Banding: A Comprehensive Guide