How to Edge Band Curved Cabinets384

Edge banding is an essential step in the process of finishing curved cabinets. It helps to protect the exposed edges of the plywood or MDF from moisture and wear, and it also gives the cabinets a more polished look. However, edge banding curved cabinets can be a bit more challenging than edge banding straight cabinets, as the curved surface makes it difficult to get a clean, tight fit. Here are a few tips on how to edge band curved cabinets:
Use a flexible edge banding material. There are a variety of edge banding materials available, but for curved cabinets, it is important to use a material that is flexible enough to conform to the curves of the cabinet. Some good options include PVC, ABS, and melamine.
Cut the edge banding to the correct length. Measure the length of the edge that you need to cover, and then cut the edge banding to that length. Be sure to cut the edge banding slightly longer than the edge, as you will need to trim it later.
Apply adhesive to the edge of the cabinet. Use a thin layer of contact cement or wood glue to the edge of the cabinet. Be sure to apply the adhesive evenly, and allow it to dry for a few minutes before proceeding.
Apply the edge banding to the cabinet. Starting at one end of the edge, carefully align the edge banding with the edge of the cabinet. Press the edge banding into place, and use a rubber roller or hand iron to smooth it out. Be sure to apply even pressure, and work your way from one end of the edge to the other.
Trim the excess edge banding. Once the edge banding is in place, use a sharp utility knife to trim the excess material. Be sure to cut the edge banding flush with the edge of the cabinet.
Sand the edge banding. Use a fine-grit sandpaper to sand the edge banding until it is smooth and flush with the surface of the cabinet.

By following these tips, you can get a clean, professional-looking edge on your curved cabinets. With a little practice, you will be able to edge band curved cabinets like a pro!

2025-01-06

Previous：How to Clean Edge Banding Glue

Next：No Trim Repair? No Problem: Unlocking the Secrets of Chinese Edge Banding