How to Apply Edge Banding to a Wardrobe132

Edge banding is a thin strip of material used to cover the exposed edges of plywood or particle board. It gives your furniture a more finished look and helps to protect the edges from moisture and damage. Applying edge banding is a relatively simple process that can be done with a few basic tools.

Here are the steps on how to apply edge banding to a wardrobe:
Prepare the surface. The first step is to prepare the surface of the wardrobe by sanding it smooth. This will help the edge banding to adhere properly.
Apply adhesive. Once the surface is sanded, you need to apply adhesive to the edge of the wardrobe and the back of the edge banding. Use a thin, even coat of adhesive.
Apply the edge banding. Carefully press the edge banding onto the wardrobe, aligning it with the edge of the plywood or particle board. Use a rubber mallet or a rolling pin to press the edge banding into place.
Trim the excess. Once the edge banding is in place, you need to trim the excess. Use a sharp knife or a utility knife to cut the edge banding flush with the edge of the wardrobe.
Sand and finish. Finally, you need to sand the edge banding smooth and finish it with a clear coat of varnish or lacquer. This will help to protect the edge banding and give it a more finished look.

Here are some additional tips for applying edge banding:
Use a sharp knife or utility knife to cut the edge banding. A dull knife will tear the edge banding and make it difficult to apply.
Apply a thin, even coat of adhesive to the edge of the wardrobe and the back of the edge banding. Too much adhesive will make it difficult to apply the edge banding and it may ooze out from the sides.
Press the edge banding into place firmly. Use a rubber mallet or a rolling pin to press the edge banding into place. This will help to ensure a strong bond between the edge banding and the wardrobe.
Trim the excess edge banding flush with the edge of the wardrobe. Use a sharp knife or a utility knife to trim the edge banding. A dull knife will tear the edge banding and make it difficult to apply.
Sand the edge banding smooth and finish it with a clear coat of varnish or lacquer. This will help to protect the edge banding and give it a more finished look.

Applying edge banding is a relatively simple process that can be done with a few basic tools. By following these steps, you can give your wardrobe a more finished look and protect the edges from moisture and damage.

2025-01-07

Previous：How to Edge Band with Hand-held Edging Tape

Next：What Width of Edge Banding Should I Use?