How to Soften Hardened Edge Banding132

Edge banding is a thin strip of material that is applied to the edges of plywood, particleboard, or MDF to give it a finished look. Edge banding can be made from a variety of materials, including wood, plastic, and metal. Over time, edge banding can become hard and brittle, especially if it is exposed to heat or moisture. This can make it difficult to work with and can also lead to cracking or peeling.

If your edge banding has become hard, there are a few things you can do to soften it. One option is to use a heat gun. Hold the heat gun about 6 inches away from the edge banding and move it back and forth until the banding becomes soft and pliable. Be careful not to overheat the banding, as this can cause it to melt or burn.

Another option for softening edge banding is to use a solvent. Apply a small amount of solvent to a rag and rub it over the edge banding. The solvent will help to break down the adhesive that is holding the banding in place, making it easier to remove. Be sure to test the solvent on a small area first to make sure it does not damage the banding.

Once the edge banding has been softened, you can remove it using a utility knife or a scraper. Be careful not to damage the substrate when removing the banding. If the banding is particularly stubborn, you may need to use a heat gun or a solvent to help loosen it.

Once the edge banding has been removed, you can apply new banding using a hot melt glue gun or a contact adhesive. Be sure to follow the manufacturer's instructions for applying the new banding.

Here are some tips for preventing edge banding from hardening:
Store edge banding in a cool, dry place.
Avoid exposing edge banding to heat or moisture.
If edge banding does become hard, soften it using one of the methods described above before attempting to remove it.

By following these tips, you can help to keep your edge banding looking its best for years to come.

2025-01-08

Previous：What is the Weight of a 100-Meter Furniture Edge Banding Strip?

Next：What Are Edgebanding Materials?