How to Apply Edging Strips to Cabinets186

Edging strips are an essential finishing touch for any cabinet. They not only add a polished look, but also protect the edges of the cabinet from wear and tear. There are a variety of different edging strips available, so it's important to choose the right one for your cabinet. Once you've selected your edging strip, you'll need to follow the steps below to apply it correctly.

1. Prepare the Cabinet Edge

The first step is to prepare the edge of the cabinet by cleaning it and making sure it's free of any dirt or debris. You can use a damp cloth to clean the edge, and then let it dry completely. Once the edge is clean, you can use a fine-grit sandpaper to sand it lightly. This will help the edging strip adhere better to the cabinet.

2. Measure and Cut the Edging Strip

Next, you'll need to measure and cut the edging strip. Measure the length of the cabinet edge that you want to cover, and then add about 1 inch to the measurement. This will give you enough edging strip to wrap around the edge and overlap slightly. Once you have the measurement, you can cut the edging strip to the desired length using a sharp utility knife.

3. Apply the Edging Strip

Now you're ready to apply the edging strip. Start by peeling off the backing paper from the edging strip. Then, carefully align the edging strip with the edge of the cabinet and press it into place. Use your fingers to smooth out the edging strip and make sure it's firmly attached to the cabinet. If the edging strip is not adhering well, you can use a small amount of wood glue to help it stick.

4. Trim the Edging Strip

Once the edging strip is applied, you'll need to trim any excess material. Use a sharp utility knife to carefully trim the edging strip flush with the edge of the cabinet. Be careful not to cut too much off, or you'll expose the raw edge of the cabinet.

5. Finish the Edging Strip

The final step is to finish the edging strip. You can do this by sanding it lightly with a fine-grit sandpaper. This will help smooth out any rough edges and give the edging strip a more polished look. You can also apply a coat of clear finish to the edging strip to protect it from wear and tear.

Applying edging strips to cabinets is a relatively easy task that can greatly improve the look and durability of your cabinets. By following the steps above, you can ensure that your edging strips are applied correctly and will last for many years to come.

2025-01-09

Previous：How to Scrape Edge Banding for a Flawless Finish

Next：Can Edge Banding Be Recycled?