How Much Do Liaoyang Furniture Edging Strips Cost?32

Liaoyang furniture edging strips are a type of decorative and protective trim used to finish the edges of furniture panels. They are typically made of PVC, ABS, or wood veneer, and are available in a wide range of colors and finishes. Edging strips can help to protect furniture from moisture, dirt, and damage, and can also give it a more finished and professional look.

The cost of Liaoyang furniture edging strips varies depending on the material, size, and quantity ordered. However, as a general rule, you can expect to pay between $0.10 and $0.50 per linear foot for edging strips made of PVC or ABS, and between $0.50 and $2.00 per linear foot for edging strips made of wood veneer.

When choosing edging strips, it is important to consider the following factors:
Material: PVC and ABS edging strips are the most affordable and easiest to work with, but they are not as durable as wood veneer edging strips. Wood veneer edging strips are more expensive and difficult to work with, but they offer a more natural and sophisticated look.
Size: Edging strips are available in a variety of widths and thicknesses. The width of the edging strip should be slightly wider than the thickness of the furniture panel. The thickness of the edging strip should be sufficient to provide adequate protection against damage.
Quantity: The quantity of edging strips you need will depend on the size of your furniture project. It is always a good idea to order a few extra edging strips in case of mistakes or damage.

If you are looking for a cost-effective and easy-to-use edging strip, PVC or ABS edging strips are a good option. However, if you are looking for a more durable and sophisticated edging strip, wood veneer edging strips are a better choice.

Additional Tips for Choosing and Using Liaoyang Furniture Edging StripsHere are a few additional tips for choosing and using Liaoyang furniture edging strips:

Choose the right adhesive: The type of adhesive you use will depend on the material of the edging strip and the furniture panel. For PVC and ABS edging strips, you can use a water-based adhesive. For wood veneer edging strips, you should use a solvent-based adhesive.
Apply the adhesive evenly: When applying the adhesive, be sure to apply it evenly to both the edging strip and the furniture panel. This will help to ensure a strong bond.
Press the edging strip into place: Once the adhesive has been applied, press the edging strip into place on the furniture panel. Use a rubber mallet or a J-roller to apply pressure evenly along the length of the edging strip.
Trim the excess edging strip: Once the edging strip has been pressed into place, use a sharp utility knife to trim any excess edging strip. Be careful not to cut into the furniture panel.
Sand the edges: Once the edging strip has been trimmed, sand the edges lightly to smooth them out. This will help to give the edging strip a finished look.

By following these tips, you can choose and use Liaoyang furniture edging strips to give your furniture a professional and finished look.

2024-10-04

Previous：How Much Does Custom Edge Banding Cost? (Pricing Guide for Furniture Manufacturers)

Next：What is the Material of Shangpin Edge Banding?