How to Scrape Edge Banding Off by Hand147

Edge banding is a thin strip of material that is applied to the edges of plywood or other substrates to create a finished, seamless look. It is a common way to protect the edges of the substrate from damage and to give the piece a more polished appearance. Edge banding is usually applied with a hot melt adhesive, which bonds the banding to the substrate. However, if you need to remove the edge banding for any reason, you can do so by hand with a few simple tools.

Tools you will need:
A utility knife
A putty knife
A heat gun (optional)

Instructions:
Use the utility knife to score the edge banding along the length of the substrate. Be careful not to cut into the substrate itself.
Once the edge banding has been scored, use the putty knife to gently pry it away from the substrate. Start at one end of the substrate and work your way towards the other end. If the edge banding is particularly difficult to remove, you can use a heat gun to soften the adhesive. Hold the heat gun about 6 inches away from the edge banding and move it back and forth until the adhesive begins to soften.
Once the edge banding has been removed, use the putty knife to smooth out any remaining adhesive residue from the substrate. You can also use a damp cloth to wipe away any remaining adhesive.

Tips:
If you are removing edge banding from a large piece of substrate, it may be helpful to have someone assist you. One person can hold the substrate while the other person scrapes off the edge banding.
Be careful not to use too much force when scraping off the edge banding, as this could damage the substrate.
If you are having difficulty removing the edge banding, you can try using a chemical stripper. However, be sure to test the stripper in an inconspicuous area first to make sure that it does not damage the substrate.

Removing edge banding by hand is a relatively simple process that can be completed with a few common tools. By following the steps outlined above, you can safely and effectively remove the edge banding from any substrate.

2025-01-12

Previous：How Hot Melt Edge Banding Glue is Manufactured

Next：How to Choose the Perfect 135 Degree Corner Edge Banding for Your Furniture