How to Install Edge Banding on a Wine Cabinet113

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, MDF, or other wood-based panels to give them a finished look. It can also be used to create decorative accents or to protect the edges from moisture and wear. Installing edge banding is a relatively simple process that can be completed with a few basic tools and materials.

Materials Needed* Edge banding
* Contact cement
* Trim router
* Flush trim bit
* Sandpaper
* Tack cloth

Instructions1. Prepare the edges. The first step is to prepare the edges of the wood panel by sanding them smooth. This will help the contact cement adhere better.
2. Apply the contact cement. Apply a thin, even coat of contact cement to the edge of the wood panel and to the back of the edge banding. Allow the cement to dry for a few minutes until it becomes tacky.
3. Align the edge banding. Carefully align the edge banding with the edge of the wood panel. Press the edge banding into place, using your fingers to smooth out any wrinkles or air bubbles.
4. Trim the excess. Use a trim router with a flush trim bit to trim the excess edge banding flush with the edge of the wood panel.
5. Sand and finish. Sand the trimmed edge smooth and apply a finish, such as paint or varnish.

Tips* For best results, use a sharp trim bit and apply light pressure when routing.
* If you are applying edge banding to a curved edge, you can use a heat gun to soften the material and make it more pliable.
* You can use different types of edge banding to achieve different looks. For example, you can use wood veneer edge banding for a natural look or PVC edge banding for a more durable finish.

2025-01-14

Previous：How to Apply Veneer Edge Banding to Cabinetry

Next：How to Edge Glass Table Tops with Ease