How to Apply Iron-On Hemming Tape101

Iron-on hemming tape is a quick and easy way to hem your clothes without having to sew. It's a great option for those who don't have a sewing machine or who are looking for a no-sew solution. Hemming tape is also a good choice for hemming delicate fabrics that can't be sewn.

Materials* Iron-on hemming tape
* Iron and ironing board
* Scissors
* Measuring tape (optional)

Instructions1. Prepare the fabric
Measure the hem and cut the fabric to the desired length. If you're using measuring tape, fold the fabric up to the desired hem length and press it firmly with your fingers. This will create a crease that you can use as a guide when cutting.
2. Cut the hemming tape
Cut a piece of hemming tape that is the same length as the hem.
3. Position the hemming tape
Place the hemming tape along the folded edge of the fabric, with the adhesive side facing the fabric. Make sure that the tape is evenly spaced and that there are no gaps.
4. Iron the hem
Preheat your iron to the setting recommended on the hemming tape package. Press the iron down on the hem, holding it in place for a few seconds at a time. Move the iron along the hem, overlapping the strokes slightly.
5. Let the hem cool
Once you've ironed the entire hem, let it cool completely. This will allow the adhesive to set and create a strong bond between the fabric and the hemming tape.
Tips
* For a more durable hem, use a double layer of hemming tape.
* If you're hemming a curved edge, cut the hemming tape into small pieces and overlap them slightly.
* If you're having trouble getting the hemming tape to stick, try using a higher heat setting on your iron.
* If you're not sure how long to iron the hem, start with a few seconds and gradually increase the time until the hem is secure.

Troubleshooting* The hemming tape isn't sticking
Make sure that you're using the correct heat setting on your iron. If the heat is too low, the adhesive won't melt properly and the tape won't stick. You can also try using a double layer of hemming tape.
* The hem is coming loose
If the hem is coming loose, it's likely that you didn't iron it long enough. Try re-ironing the hem, holding the iron in place for a few seconds at a time. You can also try using a higher heat setting.
* The hemming tape is visible
If the hemming tape is visible, it's likely that you didn't fold the fabric over far enough. Try refolding the fabric and ironing the hem again. You can also try using a thinner hemming tape.

2025-01-14

Previous：What Edging Strips Can Withstand Sun Exposure and Wear?

Next：Retro Small Edging, How to Edge It