Edge Banding Cutter Video6

In this video, we will show you how to use an edge banding cutter to trim the excess edge banding material from your workpiece.

Materials you will need:* Edge banding cutter
* Edge banding material
* Workpiece
* Safety glasses
* Dust mask

Instructions:1. Put on your safety glasses and dust mask.
2. Place the edge banding material on the workpiece, aligning the edge of the material with the edge of the workpiece.
3. Hold the edge banding cutter in your hand, with the blade facing towards the edge banding material.
4. Apply pressure to the cutter and move it along the edge of the workpiece, trimming the excess edge banding material.
5. Continue trimming the excess edge banding material until you reach the end of the workpiece.
6. Once you have trimmed the excess edge banding material, you can remove the cutter and inspect your work.

Tips:* Use a sharp blade to ensure a clean cut.
* Hold the cutter at a slight angle to the workpiece to prevent tearing the edge banding material.
* Move the cutter slowly and evenly to achieve a consistent trim.
* If you are working with a long piece of edge banding material, you may need to use a miter saw to cut the material to length before using the cutter.
* Once you have trimmed the excess edge banding material, you can use a sander or a file to smooth the edges.

Safety precautions:* Always wear safety glasses and a dust mask when using an edge banding cutter.
* Keep your hands away from the blade.
* Do not use the cutter on a workpiece that is too thin or too thick.
* If the cutter becomes dull, replace the blade.
* Store the cutter in a safe place when not in use.

2025-01-15

Previous：High Gloss Edging Strips from Liaocheng

Next：Fuxin Right Angle Edging Strip: Exceptional Quality at Competitive Prices