How to Change Edge Banding by Yourself137

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, MDF, or other wood products to give them a finished look. It can be made from a variety of materials, including wood, plastic, or metal, and is available in a wide range of colors and finishes. Edge banding can be applied using a variety of methods, but the most common is to use a hot melt adhesive.

If the edge banding on your furniture has become damaged or worn, you can easily replace it yourself. Here are the steps on how to do it:

Materials you will need:* New edge banding
* Hot melt adhesive
* Edge banding trimmer
* Sandpaper
* Iron or heat gun
* Putty knife

Instructions:1. Remove the old edge banding. Use a sharp knife to carefully score the old edge banding along the edge of the wood. Then, use a putty knife to pry the old edge banding off. Be careful not to damage the wood.
2. Clean the edge of the wood. Use a damp cloth to clean the edge of the wood to remove any dirt or debris. Allow the wood to dry completely.
3. Apply the hot melt adhesive. Apply a thin layer of hot melt adhesive to the edge of the wood. Be sure to apply the adhesive evenly.
4. Apply the new edge banding. Press the new edge banding onto the edge of the wood. Be sure to align the edge banding correctly.
5. Trim the excess edge banding. Use an edge banding trimmer to trim the excess edge banding. Be sure to trim the edge banding flush with the edge of the wood.
6. Sand the edge banding. Use sandpaper to sand the edge banding smooth. Be sure to sand in the direction of the grain.
7. Finish the edge banding. You can finish the edge banding by applying a clear coat of varnish or polyurethane. This will help to protect the edge banding from wear and tear.

Tips:* If you are using a heat gun to apply the hot melt adhesive, be sure to hold the heat gun about 6 inches away from the wood.
* If you are having trouble getting the edge banding to stick, you can try using a clothes iron to heat the edge banding.
* Be sure to wear gloves when working with hot melt adhesive.
* If you make a mistake, don't worry. You can simply remove the old edge banding and start over.

2025-01-15

Previous：How to Adjust Color of Black Edge Banding in a Chinese Factory

Next：How to Apply Perfect Edge Banding Glue