How to Cut Edge Banding [With Pictures]27

Edge banding is a thin strip of material that is applied to the exposed edges of plywood, particle board, or MDF. It is used to cover the raw edge of the material and to protect it from moisture and damage. Edge banding can also be used to improve the appearance of a piece of furniture or to add a decorative touch.

There are several different types of edge banding available, including wood, plastic, and metal. The type of edge banding that you choose will depend on the application and the desired look. Once you have chosen the type of edge banding, you will need to cut it to the desired length.

To cut edge banding, you will need a sharp knife or a miter saw. If you are using a knife, simply score the edge banding along the desired length and then snap it off. If you are using a miter saw, set the saw to a 45-degree angle and then cut the edge banding to the desired length.

Once the edge banding is cut, you will need to apply it to the edge of the material. To do this, you will need to use a hot iron or a glue gun. If you are using a hot iron, simply heat the iron to the desired temperature and then run it along the edge of the edge banding. If you are using a glue gun, simply apply a thin bead of glue to the edge of the edge banding and then press it onto the edge of the material.

Once the edge banding is applied, you will need to trim off the excess material. To do this, you can use a sharp knife or a flush trim saw. If you are using a knife, simply score the edge banding along the desired length and then snap it off. If you are using a flush trim saw, set the saw to the desired depth and then trim off the excess material.

Once the excess material is trimmed off, you will need to sand the edge banding smooth. To do this, you can use a sanding block or an orbital sander. Start by sanding with a coarse grit sandpaper and then gradually work your way up to a finer grit sandpaper. Once the edge banding is sanded smooth, you can apply a finish to protect it. A clear finish, such as polyurethane, will help to protect the edge banding from moisture and damage.

Here are some additional tips for cutting edge banding:
Use a sharp knife or a miter saw to cut the edge banding. A dull knife will tear the edge banding and a miter saw will give you a clean, precise cut.
Apply the edge banding to the edge of the material using a hot iron or a glue gun. A hot iron will melt the edge banding and bond it to the material, while a glue gun will provide a strong, durable bond.
Trim off the excess material using a sharp knife or a flush trim saw. A sharp knife will give you a clean, precise cut, while a flush trim saw will give you a smooth, finished edge.
Sand the edge banding smooth using a sanding block or an orbital sander. A sanding block will give you a smooth, even finish, while an orbital sander will give you a faster, more efficient finish.
Apply a finish to the edge banding to protect it. A clear finish, such as polyurethane, will help to protect the edge banding from moisture and damage.

By following these tips, you can easily cut and apply edge banding to your furniture projects.

2025-01-16

Previous：How to Cut Porcelain Tile Edging

Next：How to Install Wood Veneer Edge Banding