How to Make Cutters for Edging Tape in the Furniture Factory?73

The edging strip is a kind of furniture accessories that is used to seal the edge of the board. The edge banding machine is a machine used to paste the edging strip to the edge of the board. The edge banding cutter is a tool used to cut the edge banding. We can use the CNC machining center or the wire cutting machine to make edge banding cutters. However, the cost of making cutters is very high. So we can use other methods to make edge banding cutters.

The materials needed to make edge banding cutters are as follows:
1. Carbide rods,
2. Milling cutter,
3. Grinding wheel,
4. Angle grinder,

Steps:
1. Use an angle grinder to cut the carbide rod into the required length.
2. Use a milling cutter to grind the carbide rod into the required shape.
3. Use a grinding wheel to grind the edge of the carbide rod to make it sharp.
4. The edge banding cutter is completed.

We made a simple edge banding cutter, but it is not durable. Because the carbide we use is not processed by heat treatment, so the hardness of the carbide is not enough. In order to improve the service life of the edge banding cutter, we can use a cemented carbide rod to make the edge banding cutter. The hardness of the cemented carbide rod is higher than that of the carbide rod, so the service life of the edge banding cutter made of the cemented carbide rod is longer. In addition, we can also use other methods to improve the service life of the edge banding cutter, such as coating the edge banding cutter with a wear-resistant coating.

2025-01-17

Previous：How to Edge Band Furniture Like a Pro: A Comprehensive Guide from a Chinese Furniture Edging Strip Factory

Next：How to Remove Edge Banding Safely and Effectively