How to Finish Edging Strips on Chinese Furniture199

As a leading supplier of edge banding strips in China, we understand the importance of proper finishing to ensure a durable and aesthetically pleasing result. Our comprehensive guide provides detailed instructions on how to achieve a flawless finish on your furniture edges.

1. Prepare the Edging Strip

Before applying the edging strip, ensure that the furniture edge is clean, dry, and free of any debris. Cut the edge banding to the desired length and angle using a sharp utility knife or miter saw. For best results, use a dedicated edge trimmer for precise and clean cuts.

2. Apply Contact Adhesive

Select a high-quality contact adhesive specifically designed for bonding edge banding. Apply a thin, even layer of adhesive to both the furniture edge and the back of the edging strip. Allow the adhesive to become slightly tacky before proceeding.

3. Position and Press

Align the edging strip with the furniture edge and press it firmly into place. Use a rubber mallet or hand roller to apply even pressure along the entire length of the strip. This will ensure proper adhesion and minimize any air bubbles.

4. Trim Excess Length

Once the edging strip is firmly attached, trim any excess material that extends beyond the furniture edge. Use a utility knife or edge trimmer to carefully cut the strip flush with the surface.

5. Finishing Techniques

Depending on the material and desired finish, you can choose from various finishing techniques:

Sanding: Use fine-grit sandpaper to smooth any rough edges or imperfections. Sanding can also help to create a smooth transition between the edging strip and the furniture surface.

Surfacing: For high-gloss or lacquered finishes, apply a thin layer of surfacing compound on the edging strip and surrounding area. Allow it to dry and then buff it to a smooth and shiny surface.

Polishing: Use a polishing compound and a soft cloth to enhance the luster and protect the edging strip. Polishing helps to bring out the natural grain or color of the material.

6. Sanding and Sealant

Once the finish is complete, lightly sand the edging strip and surrounding area using fine-grit sandpaper. This will remove any surface imperfections and prepare it for sealant application. Apply a clear sealant to protect the edging strip and the surrounding area from moisture, wear, and stains.

Additional Tips* Use the correct type of edge banding for the specific furniture material.
* Ensure that the contact adhesive is compatible with the furniture and edging strip materials.
* Allow ample time for the adhesive to set properly before trimming the excess edging material.
* Wear gloves and safety glasses when working with sharp tools or adhesives.
* Practice on a scrap piece of material to perfect the finishing techniques before applying to the actual furniture.
By following these step-by-step instructions and incorporating our additional tips, you can achieve a professional-looking and durable edge finish on your Chinese furniture.

2025-01-18

Previous：How to Remove Edge Banding

Next：How To Fix Split Edge Banding: A Detailed Guide