How to Use Solid Wood Edge Banding236

Solid wood edge banding is a thin strip of wood used to cover the exposed edges of plywood, MDF, or other wood-based panels. It is a popular choice for furniture makers and woodworkers because it is durable, easy to work with, and can be stained or painted to match the existing finish.

There are two main types of solid wood edge banding: self-adhesive and non-adhesive. Self-adhesive edge banding has a layer of pressure-sensitive adhesive on one side, which makes it easy to apply. Non-adhesive edge banding must be glued in place with a separate adhesive.

How to Apply Self-Adhesive Edge Banding

Step 1: Prepare the edge. The edge of the panel should be clean, dry, and free of dust. If the edge is rough, you may need to sand it smooth before applying the edge banding.

Step 2: Cut the edge banding. Cut the edge banding to the desired length. The edge banding should be about 1/16 inch longer than the edge of the panel.

Step 3: Apply the edge banding. Peel off the backing paper from the edge banding and align it with the edge of the panel. Press down on the edge banding to adhere it to the panel.

Step 4: Trim the excess edge banding. Use a sharp utility knife to trim the excess edge banding flush with the edge of the panel.

How to Apply Non-Adhesive Edge Banding

Step 1: Prepare the edge. The edge of the panel should be clean, dry, and free of dust. If the edge is rough, you may need to sand it smooth before applying the edge banding.

Step 2: Apply the adhesive. Apply a thin layer of adhesive to the edge of the panel. You can use a brush, a roller, or a spray gun to apply the adhesive.

Step 3: Cut the edge banding. Cut the edge banding to the desired length. The edge banding should be about 1/16 inch longer than the edge of the panel.

Step 4: Apply the edge banding. Press the edge banding into the adhesive on the panel. Use a roller or a hand press to ensure that the edge banding is firmly attached to the panel.

Step 5: Trim the excess edge banding. Use a sharp utility knife to trim the excess edge banding flush with the edge of the panel.

Tips for Applying Solid Wood Edge BandingUse a sharp utility knife to trim the edge banding. A dull knife will tear the edge banding and make it difficult to get a clean finish.
Apply pressure to the edge banding when you are adhering it to the panel. This will help to ensure that the edge banding is firmly attached.
If you are using non-adhesive edge banding, make sure that the adhesive is applied evenly to the edge of the panel. This will help to prevent the edge banding from peeling off.
Allow the adhesive to dry completely before trimming the excess edge banding. This will help to prevent the edge banding from chipping or peeling.

2025-01-20

Previous：How to Install Wood Veneer Edge Banding on Doors

Next：How to Prevent Acrylic Door Edge Banding from Delaminating